WenmarOpen by Wenmar Pro

Service bulletin 9100772

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id11030147
Published by NHTSA2026-03-18
Manufacturer's number9100772
Manufacturer's date2026-03-09
NHTSA componentSUSPENSION

NHTSA's summary

WL & DJ Disengaging Stabilizer Bar Front [SHG] Follow procedure in SOL s2602000001 before replacing Smart Stabilizer Bar Assembly

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Suspension

Vehicles listed
JEEP GRAND CHEROKEE2026
JEEP GRAND CHEROKEE 4XE2026 (the catalog's model; the bulletin names a series or trim of it)
JEEP GRAND CHEROKEE L2026
RAM 25002025, 2026

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
S2102000004 REV.D2026-07-02. Service bulletin. WL Front Control Arm Bushing - Handling Link Has Loose Rubber Appearance
9100811 Rev 42026-07-02. Service bulletin. Clunking when going over bumps, potholes, or turns. During diagnosis dealers may find rubber separating from the bushing on the handling link (SOL S2102000004 Rev C. for reference). This is normal and most likely is not attributed to the noise. Please follow normal diagnosis and ensure all tie-rod and ball joints are properly torqued and if worn, replace. If diagnosis leads to lower control arm replacement, the tension link(s) should be replaced first then test driven to ensure noise has disappeared before any handling link replacements.
S2503000001 REV.A2026-06-18. Service bulletin. Service 4WD Message, With Any Combination Of The Following Front Axle Disconnect (FAD) Diagnostic Trouble Codes
9100811Rev32026-06-03. Service bulletin. ***68375577A$ is not showing the correct verbiage please update and correct*** Clunking when going over bumps, potholes, or turns. During diagnosis dealers may find rubber separating from the bushing on the handling link (SOL S2102000004 Rev C. for reference). This is normal and most likely is not attributed to the noise. Please follow normal diagnosis and ensure all tie-rod and ball joints are properly torqued and if worn, replace. If diagnosis leads to lower control arm replacement, the tension link(s) should be replaced first then test driven to ensure noise has disappeared before any handling link replacements.
9100811 REV12026-05-28. Service bulletin. Clunking when going over bumps, potholes, or turns. During diagnosis dealers may find rubber separating from the bushing on the handling link (SOL S2102000004 Rev C. for reference). This is normal and most likely is not attributed to the noise. Please follow normal diagnosis and ensure all tie-rod and ball joints are properly torqued and if worn, replace. If diagnosis leads to lower control arm replacement, the tension link(s) should be replaced first then test driven to ensure noise has disappeared before any handling link replacements.
91008112026-05-20. Service bulletin. Clunking when going over bumps, potholes, or turns. During diagnosis dealers may find rubber separating from the bushing on the tension link. This is normal and most likely is not attributed to the noise. Please follow normal diagnosis and ensure all tie-rod and ball joints are properly torqued and if worn, replace. If diagnosis leads to lower control arm replacement, the tension link(s) should be replaced first then test driven to ensure noise has disappeared before any handling link replacements.
S2102000004 REV.C2026-04-29. Service bulletin. WL Front Control Arm Bushing - Handling Link Has Loose
S26020000032026-04-01. Service bulletin. Clunk, Creaking, Squeaking, Knocking Noise From Front Suspension Over Bumps And Or Rough Road Conditions.
S26020000012026-03-13. Service bulletin. Service Electric Sway Bar Lamp On In Cluster. Diagnostic Trouble Code (DTC) C008E-00 In Auto Sway Bar (ASBS)
S2521000004 REV.B2026-01-21. Service bulletin. The customer is experiencing a clicking or pop noise from the steering knuckle and bearing area during turns while driving.