Service bulletin SA-040-25a

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
Type	Service bulletin
NHTSA id	11026348
Published by NHTSA	2025-12-05
Manufacturer's number	SA-040-25a
Manufacturer's date	2025-11-18
NHTSA component	POWER TRAIN
Manufacturer's system	Automatic Transmission

NHTSA's summary

A New Automatic Transmission Fluid (ATF-A7) is being used for some 2023-2026 models. ATF-A7 is an extremely low viscosity formulation with low friction to achieve best-in-class fuel economy and driving performance. For easy identification, ATF-A7 is colored Red and ATF-FZ is colored Blue. ATF-A7 includes UV-reactive dye (see "Fluorescence Example" below). There is NO interchangeability between ATF-A7 and ATF-FZ. For CX-30, Mazda3, and CX-5, some 2.5L and all 2.5T engines still use ATF-FZ. Verify the type of ATF according to what is in MGSS (TRANSMISSION/TRANSAXLE TECHNICAL DATA) or what is marked on the dipstick (see "ATF-A7 Identification" below).

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Transmission and driveline

Vehicles listed
MAZDA CX-30	2023, 2024, 2025, 2026
MAZDA CX-5	2024, 2025, 2026
MAZDA CX-70	2025, 2026
MAZDA CX-90	2024, 2025, 2026
MAZDA MAZDA3	2023, 2024, 2025, 2026

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
24V816000	2024-10-31. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY:MANAGEMENT SYSTEM/ENERGY CONTROL MODULE (BMS/BECM):SOFTWARE
24V815000	2024-10-31. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM)
2023580	2023-10-26. Powertrain
23V719000	2023-10-26. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
SA-061-26	2026-10-01. Service bulletin. DESCRIPTION Use this guide before ordering or replacing an AT component on applicable H3T vehicles. QUICK CHECKLIST BEFORE ORDERING Confirm the vehicle is a CX-90 (KK) or CX-70 (KJ) with H3T and is within the applicable market coverage. • In GEPC, identify the AT component part number for the vehicle. • Use the GEPC lookup tables below to determine whether the vehicle requires Table A or Table B parts. • Order the complete set of parts listed in the applicable table. DO NOT order the AT component by itself. • Check whether water hose removal is required for that GEPC part number. • Follow the applicable WSM repair procedure for AT component removal/installation, water hose removal, and oil hose/oil pipe installation in MGSS. • IMPORTANT: If only the AT component is ordered, required replacement parts will be missing, and the repair cannot be completed.
PF-26-04	2026-10-01. Other. SUBJECT: ORDERING REQUIREMENT FOR AT COMPONENTS FOR H3T (INLINE 6) Use this guide before ordering or replacing an AT component on applicable H3T vehicles. QUICK CHECKLIST BEFORE ORDERING • Confirm the vehicle is a CX-90 (KK) or CX-70 (KJ) with H3T and is within the applicable market coverage. • In GEPC, identify the AT component part number for the vehicle. • Use the GEPC lookup tables below to determine whether the vehicle requires Table A or Table B parts. • Order the complete set of parts listed in the applicable table. DO NOT order the AT component by itself. • Check whether water hose removal is required for that GEPC part number. • Follow the applicable WSM repair procedure for AT component removal/installation, water hose removal, and oil hose/oil pipe installation in MGSS. IMPORTANT: If only the AT component is ordered, required replacement parts will be missing, and the repair cannot be completed.
SA-0-57-26	2026-09-04. Service bulletin. This Service Alert supersedes the previously issued SA(s) listed below. The changes are noted in Red. SA-074/24 10/04/24 DESCRIPTION Some customers may experience a grunt or grind noise when the transmission shifts from 1st gear to 2nd gear. The grunt-type noise is produced during the 2nd gear engagement. This issue will not affect the driveability or reliability of the vehicle. The vehicle is safe to drive. It is OK to release the vehicle back to the customer. REPAIR PROCEDURE None
MSP66 Warr b	2026-05-05. Service campaign. 2024-2026 CX-90 and 2025-2026 CX-70 Engine Warning Light Illumination with DTC P0DAB CONDITION OF CONCERN On certain subject vehicles, the engine warning light may illuminate, and the vehicle may be limited to engine-only operation due to activation of the fail-safe mode. Motor assist, i-stop and motor regenerative functions may be disabled, although the vehicle is safe to drive. The DTC P0DAB (Cell voltage variation malfunction) may be stored. Causal factor: Improper software in the Powertrain Control Module (PCM) and - MHB in MDARS display - BECM (Battery Energy Control Module). OUTLINE OF REPAIR Reprogram the PCM and MHB with the Mazda Modular Diagnostic System (M-MDS), using Mazda Diagnostic And Repair Software (MDARS). Note: The TCM may or may not be reprogrammed, please see below for the claim type depending on whether the TCM was programmed or not programmed. All 2026MY vehicles do not require TCM programming. Older vehicles especially with recent software or campaign updates will already have the TCM at the latest software version and will not be programmed.
SA-029-26	2026-05-05. Service bulletin. This Service Alert supersedes the previously issued SA listed below: The changes are noted in Red. SA-011/24 02/12/24, 06/06/24, 07/29/24 DESCRIPTION Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers. SCHEDULED MAINTENANCE Refer to the applicable Workshop Manual or Owner's Manual for vehicle -specific manufacturer scheduled maintenance. Workshop Manual - Refer to section 00-00 SCHEDULED MAINTENANCE. Owner's Manual - Refer to section 8 Maintenance and Care. b. Note: Please refer to the information below outlining the services not included in Mazda's Factory Scheduled Maintenance: IMPORTANT: Recommending fluid flushes when not necessary can lead to customer confusion and dissatisfaction. Fluid flushing for preventive maintenance purposes is strongly discouraged, unless otherwise specified in a published procedure (Owner’s Manual, Workshop Manual, Technical Service Bulletin, etc.).
01-007-26	2026-05-03. Service bulletin. Some vehicles may exhibit the check engine light ON with DTC P2112 (Throttle valve actuator control motor current system: Characteristic malfunction). The DTC is stored when the engine is started at sub-zero ambient temperatures. To eliminate this concern, the PCM logic has been modified. REPAIR PROCEDURE Reprogram the PCM with the Mazda Modular Diagnostic System (M-MDS), using Mazda Diagnostic and Repair Software (MDARS). Refer to MDARS ECU Reprogramming Procedure.
01-003-26a	2026-05-03. Service bulletin. This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red text. 01-003/26 01/30/26 Some vehicles may exhibit a check engine light ON with DTC P20F8:00 stored. P20F8:00 - Swirl control circuit range/performance problem. In these cases, increasing temperature levels of the Swirl Control Valve (SCV) motor due to excessive actuation leads to duty limitation, causing poor opening􀀀angle response and resulting in a stuck judgment. To eliminate this concern, the PCM logic has been modified. REPAIR PROCEDURE Reprogram the PCM with the Mazda Modular Diagnostic System (M-MDS), using Mazda Diagnostic and Repair Software (MDARS). Refer to MDARS ECU Reprogramming Procedure.
SA-011-26	2026-03-05. Service bulletin. Some vehicles may display some (or all) of the following symptoms: • Check engine light on with DTC P061B • Light increase in engine rpms during acceleration • Transmission will not shift past 4th gear • Various U codes (U0401 ABS, U0401, U0415 FSC, U0301, U0316 SBS/MRCC, U0442 TCM) may be set
SA-058-25	2026-01-03. Service bulletin. The 7G large platform utilizes a new 8-speed automatic transmission. Due to changes in the parking lock mechanism, which is now hydraulically operated, the neutral range in the transmission can only be achieved if the engine is running (or “Ready-On” for PHEV). With this design, there is no provision to manually engage neutral. This can cause challenges to dealers, customers, or towing providers when a vehicle cannot start and can't move, usually due to a discharged (dead) battery. In the event that a vehicle cannot be started or achieve “ready-on”, wheel dollies must be used to allow the vehicle to be rolled and moved. NOTE: The following procedure is for moving vehicle around the service shop and not for towing purposes. Please reference the owner's manual for towing instructions.
SA-056-25	2025-12-05. Service bulletin. When inspected, the differential or PTO oil is dark or black. This is considered normal and NO repair should be performed. During production, differential ring and pinion gears receive a manganese phosphate coating (commonly referred to as black oxide). This coating forms a porous, oil-retentive surface that improves boundary lubrication and reduces adhesive wear during initial contact cycles. Designed as a sacrificial layer, it is gradually removed under load throughout the break-in process. As a result, after the first few hundred miles, or at the initial gear oil service interval, the lubricant may appear darkened by the worn-off coating. It will contain trace ferrous particles from the normal run-in of the gear teeth and bearing surfaces. This condition is expected and does not, by itself, indicate an issue with the differential or PTO gears.