Service bulletin SSM 53865
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 11019474 |
| Published by NHTSA | 2025-06-11 |
| Manufacturer's number | SSM 53865 |
| Manufacturer's date | 2025-06-04 |
| NHTSA component | ELECTRICAL SYSTEM; UNKNOWN OR OTHER; VISIBILITY/WIPER |
| Manufacturer's system | front parking sensors |
NHTSA's summary
Some 2024 Ranger vehicles may exhibit a Front Parking Sensors Not Available Sensor Blocked See Manual message displayed on the instrument panel cluster (IPC) with no DTCs in the image processing module A (IPMA) when driving in cold ambient weather conditions. The warning message may appear multiple times during a drive cycle to include initial low speed acceleration and when coming to a stop. The warning may stop reappearing after the ambient temperature rises well above freezing. If all parking sensors are free of blockages and there are no parking sensor related DTCs stored in the (IPMA), replace both front active park aid sensors (base part number: 15K859) located in the passenger and driver fender lip mouldings. Refer to Workshop Manual (WSM), Section 413-13C for removal and installation procedure. For claiming, use causal part 15K859 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Electrical system, Glass, wipers and mirrors, Wipers and washers
| FORD RANGER | 2024 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| SSM 54137 | 2025-08-19. Service bulletin. Various 2021-2025 Ford and Lincoln vehicles equipped with the rear camera on demand feature may exhibit "Please Check Surroundings For Safety" or "Full View Not Available" messages when the rear camera button is pressed and the vehicle is not in reverse. Inform customers this condition is considered normal operation and does not affect vehicle durability because the full rear view camera image can only be shown when the vehicle is in reverse. No additional diagnosis or service is required for this condition. |
|---|