Service campaign B120525
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service campaign |
|---|---|
| NHTSA id | 11018723 |
| Published by NHTSA | 2025-05-31 |
| Manufacturer's number | B120525 |
| Manufacturer's date | 2025-05-24 |
| Campaign id or software version | 0012400600 |
| NHTSA component | ELECTRICAL SYSTEM; ENGINE |
NHTSA's summary
Moisture may enter the start generator supply line and cause corrosion inside the line.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Electrical system, Engine
| BMW 330I | 2024 |
|---|---|
| BMW X5 | 2024 |
| BMW X7 | 2024 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 2026331 | 2026-07-08. Engine |
|---|---|
| 2026040 | 2026-01-30. Engine |
| 26V056000 | 2026-01-30. ELECTRICAL SYSTEM:STARTER ASSEMBLY |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| B630526 | 2026-09-28. Service bulletin. After programming the vehicle via ISTA/RSUto I-level …26-03-5xx, customer may reportsome of the interior ambient lighting strips(arrows) may begin to fail sporadically after adeep sleep cycle. This concern is temporary and the interiorambient lighting will be restored on its ownafter the vehicle is locked/unlocked or colorselection setting is changed. |
|---|---|
| B121126 | 2026-09-28. Service bulletin. Potential customer complaints with no fault codes stored / No MIL displayed. 1. “Rough idle after idling for a longer period of time” 2. “Vehicle feels like it is misfiring at idle” The automatic Start/Stop function is deactivated. The vehicle is stopped and the engine runs at idle speed. After prolonged idle operation (approximately 30 to 50 seconds), a slight jolt or slight change in idlespeed may be noticeable. There are no relevant errors in the DME fault code memory. No mixture control error, no misfiring, no error relating to a relevant component of the drive system. Motor vehicles affected: 1. Only MHEVs (mild hybrid electric vehicle) with crankshaft-driven starter generator. 2. Only vehicles with optional equipment 01CE = recuperation system 3. Affected I-levels: I-level 24-07-500 or higher |
| B064426 | 2026-08-28. Other. Air Flap Return |
| B064126 | 2026-08-28. Other. Fan Return |
| B630526 | 2026-08-27. Service bulletin. After programming the vehicle via ISTA/RSUto I-level …26-03-5xx, some of the interiorambient lighting strips (arrows) may begin tofail sporadically after a deep sleep cycle. |
| B340124 | 2026-08-27. Service campaign. After replacement of the Integrated Braking system (IB)/Power Brake the total distance covered might belower than when handed over to the workshop for the repair. |
| B652026 | 2026-07-31. Service bulletin. The Central Information Display (CID) side of the Multifunction Display (MFD) may flicker intermittently. Theflickering manifests itself in three phases: The image is distorted The central information display turns black (black screen) The image is OK again The complete flickering episode with all the above-mentioned three phases only lasts about half a second intotal each time. |
| B120326 | 2026-07-31. Emissions. Due to an implementation error in various OBD diagnostics in the vehicle's control units, in very rare cases itmay happen that stored fault memory codes (DTCs) and the MIL (warning light) are not automaticallydeleted even though the underlying malfunction has already been rectified. This does not comply with the statutory OBD specifications. |
| B120626 | 2026-07-03. Service campaign. In these vehicles with an S68 engine, an incorrect diagnosis of the Valvetronic (VVT) may occur. Undercertain operating conditions, the software may detect a short-circuit in the valve control system even thoughthere is no fault. When the above-mentioned fault occurs, the red Check Control warning light ‘Drive system fault’ illuminates.This can result in the intake valves closing gradually, which may lead to misfires while the engine is running. |
| B120626 | 2026-06-01. Service campaign. DELIVERY STOP: VARIABLE VALVE TIMING |