WenmarOpen by Wenmar Pro

Service bulletin B650825

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id11017569
Published by NHTSA2025-05-02
Manufacturer's numberB650825
Manufacturer's date2025-04-28
NHTSA componentELECTRICAL SYSTEM

NHTSA's summary

Central Information Display (CID) side of the Multifunction Display may intermittently black out.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system

Vehicles listed
BMW 230I2025
BMW 330I2025
BMW 430I2025
BMW X12025
BMW X22025
BMW X52025
BMW X62025
BMW X72025
BMW XM2024
BMW Z4 M40I2025

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
20251682025-04-01. Electrical
25V2020002025-04-01. ELECTRICAL SYSTEM:STARTER ASSEMBLY; ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
B6305262026-09-28. Service bulletin. After programming the vehicle via ISTA/RSUto I-level …26-03-5xx, customer may reportsome of the interior ambient lighting strips(arrows) may begin to fail sporadically after adeep sleep cycle. This concern is temporary and the interiorambient lighting will be restored on its ownafter the vehicle is locked/unlocked or colorselection setting is changed.
B6305262026-08-27. Service bulletin. After programming the vehicle via ISTA/RSUto I-level …26-03-5xx, some of the interiorambient lighting strips (arrows) may begin tofail sporadically after a deep sleep cycle.
B3401242026-08-27. Service campaign. After replacement of the Integrated Braking system (IB)/Power Brake the total distance covered might belower than when handed over to the workshop for the repair.
B6520262026-07-31. Service bulletin. The Central Information Display (CID) side of the Multifunction Display (MFD) may flicker intermittently. Theflickering manifests itself in three phases: The image is distorted The central information display turns black (black screen) The image is OK again The complete flickering episode with all the above-mentioned three phases only lasts about half a second intotal each time.
B6518262026-07-03. Service bulletin. If BMW Intelligent Personal Assistant is active in the vehicle, once the customer exits the vehicle and a newkey cycle starts, the Intelligent Personal Assistant is deactivated and no longer available.
B6517262026-07-03. Service bulletin. After a factory reset of the head unit, the navigation voice input cannot be activated or deactivated.
B6514262026-07-03. Service bulletin. The vehicle may experience various operational issues with Apple CarPlay Projected Modes such as: Dropped connections No automatic reconnection Display errors
B6512262026-07-03. Service bulletin. The voice command to deactivate Automatic Engine Start/Stop function can also trigger the activation ofIconic Sounds.
B6101262026-07-03. Service bulletin. During vehicle start-up the Secure Element (SE) of the BCP may fail causing communication errors. TheCheck Control message “Drive carefully. Driving stabilisation.” will appear. In addition, the fault memoryentries below will be stored within 40 seconds of each other. ACSM: 02010A - Coding: Coding data not qualified VIP: 02390A - VIP control unit: Coding data not released, signature IB: 02290A - DSC control unit: Coding data not released, signature HKFM: 020D0A - HKFM: Coding data are not qualified
B1206262026-07-03. Service campaign. In these vehicles with an S68 engine, an incorrect diagnosis of the Valvetronic (VVT) may occur. Undercertain operating conditions, the software may detect a short-circuit in the valve control system even thoughthere is no fault. When the above-mentioned fault occurs, the red Check Control warning light ‘Drive system fault’ illuminates.This can result in the intake valves closing gradually, which may lead to misfires while the engine is running.