WenmarOpen by Wenmar Pro

Service bulletin PIE0806A

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id11015244
Published by NHTSA2025-03-07
Manufacturer's numberPIE0806A
Manufacturer's date2025-02-27
NHTSA componentSTRUCTURE:BODY

NHTSA's summary

This engineering information (EI Lite) is requesting technicians use the FPR Process in regards to rocker moldings experiencing poor fit, loose parts, broken clips and/or warpage resulting in a warranty replacement.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Body and frame

Vehicles listed
CADILLAC ESCALADE2023, 2024, 2025
CADILLAC ESCALADE ESV2023, 2024, 2025
CHEVROLET SUBURBAN2023, 2024
CHEVROLET SUBURBAN 15002023, 2024, 2025 (the catalog's model; the bulletin names a series or trim of it)
CHEVROLET TAHOE2023, 2024, 2025
GMC YUKON2024, 2025
GMC YUKON XL2023, 2024, 2025
GMC YUKON XL 15002023 (the catalog's model; the bulletin names a series or trim of it)

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
PIE0806B2025-09-10. Service bulletin. This engineering information (EI Lite) ends the need for using the FPR Process in regards to rocker moldings experiencing poor fit, loose parts, broken clips and/or warpage resulting in a warranty replacement and to refer to SI for further diagnosis.
25-NA-1172025-09-06. Service bulletin. This technical bulletin provides a procedure to correct the condition of Click or Tick Noise Coming from the Heads Up Display or Upper IP Area.
PIE08232025-04-25. Service bulletin. This engineering information (EI Lite) instructs the technician to use the Field Product Reporting (FPR) App process if you encounter a vehicle where a customer comments on the lower fascia and/or lower grille tabs not engaged and/or warped.
19-NA-2552025-04-10. Service bulletin. This service bulletin provides frame coating repair information to correct a customer concern of wax coating on frame peeling, metal shows corrosion/rusting (U.S. and Canada Only).
PIE0820A2025-04-09. Service bulletin. This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regard to the power sliding console being inoperative.
24-NA-0992025-03-14. Service bulletin. This bulletin provides a service procedure to replace the sway bar bracket retainers if found the cause of the clunking noise from front of vehicle.
05-08-51-001L2025-03-08. Service bulletin. This informational bulletin provides a procedure on how to remove the paint stain that may present itself under the shipping film.
PIE08202025-03-07. Service bulletin. This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the power sliding console being inoperative.
PIT6288D2025-02-18. Service bulletin. This Preliminary information communicates an issue with a service door latch system messages. On Cadillac and Chevrolet models dealership are to cycle the child door latch on and off to correct the issue. On GMC models GM engineering is working on a fix.
22-NA-2442025-02-12. Service bulletin. This warranty administration service bulletin provides information about GM Accessories - Dealer-Installed, Repaired or Replaced During Warranty Coverage Period.