WenmarOpen by Wenmar Pro

Service bulletin TSB_CLI057

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id11009492
Published by NHTSA2024-10-30
Manufacturer's numberTSB_CLI057
Manufacturer's date2024-10-22
NHTSA componentVISIBILITY/WIPER
Manufacturer's systemCLI

NHTSA's summary

TECHNICAL SERVICE BULLETIN: HEATING, VENTILATION, AND AIR CONDITIONING (HVAC) BLOWER MOTOR FUSE RELOCATION - This bulletin provides the procedure to relocate the Heating, Ventilation, and Air Conditioning (HVAC) blower motor 40-ampere fuse on some 2016-2020MY Optima (JFa) vehicles produced from August 28, 2015 through June 23, 2020 which may experience an inoperative blower motor due to a blown multi-fuse at position #3. The HVAC system provides cooling and heating to help maintain a comfortable environment inside the vehicle cabin. The blower motor provides primary airflow for the HVAC system. Extended use of the HVAC system at high fan speeds may cause damage to the multi-fuse terminals for the HVAC blower motor circuit, which can cause the blower motor to become inoperative, resulting in reduced heat and air conditioning.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Glass, wipers and mirrors, Wipers and washers

Vehicles listed
KIA OPTIMA2016, 2017, 2018, 2019, 2020

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
TSB_CLI049_R22026-09-02. Service bulletin. TECHNICAL SERVICE BULLETIN: PARTIAL REPAIR – ELECTRICAL A/C COMPRESSOR - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information regarding the partial repair of the Air Conditioning (A/C) compressor assembly on some 2011MY~ Optima Hybrid (TF HEV, JF HEV/PHEV), 2015MY~ Soul EV (PS EV), 2017MY~ Niro (DE HEV/PHEV/EV), 2022MY~ EV6 (CV), 2021MY~ Sorento (MQ4 HEV/PHEV), 2023MY~ Sportage (NQ5 HEV/PHEV), and 2023MY~ Niro (SG2 EV/HEV/PHEV) vehicles.
PS299_R42020-11-03. Service bulletin. PITSTOP: CORRECT PROCEDURE FOR RAISING WINDSHIELD WIPERS - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. When servicing windshield wipers on the below listed vehicles, including during PDI, ensure to raise the wiper arms to a vertical position to avoid damaging the paint on the rear edge of the hood.
PS299_R32018-10-09. Service bulletin. PITSTOP - CORRECT PROCEDURE FOR RAISING WINDSHIELD WIPERS - When servicing the windshield wipers on the listed vehicles below during PDI, make sure to use the procedure outlined below to raise the wiper arms to the fully vertical position in order to avoid damaging the paint on the rear edge of the hood. It is important to note that the wipers on these vehicles are recessed under the hood to provide better appearance and reduced wind noise characteristics. This procedure applies to both key start and SMK type ignition systems.
PS299_R22018-08-06. Service bulletin. PITSTOP - CORRECT PROCEDURE FOR RAISING WINDSHIELD WIPERS - When servicing the windshield wipers on 2015MY~ K900 (KH), 2016MY~ Optima (JFa/JF), and 2018MY~ Stinger (CK) vehicles during PDI, make sure to use the procedure outlined below to raise the wiper arms to the fully vertical position in order to avoid damaging the paint on the rear edge of the hood. It is important to note that the wipers on these vehicles are recessed under the hood to provide better appearance and reduced wind noise characteristics.
PS299R12017-01-17. Service bulletin. CORRECT PROCEDURE FOR RAISING WINDSHIELD WIPERS - THIS ARTICLE OUTLINES THE PROCEDURE TO BE USED TO RAISE THE WIPER ARMS TO THE FULLY VERTICAL POSITION.