Service bulletin CBR-570 202409
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 11008374 |
| Published by NHTSA | 2024-10-03 |
| Manufacturer's number | CBR-570 202409 |
| Manufacturer's date | 2024-09-20 |
| NHTSA component | ELECTRICAL SYSTEM; FUEL/PROPULSION SYSTEM |
NHTSA's summary
CBR: US17 GHG Common Rail Fuel System Component Electrical Faults - Model Year 2017 To 2024
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Electrical system, Fuel system
| MACK ANTHEM (AN) | 2017 |
|---|---|
| MACK ANTHEM (AN) | 2018, 2019, 2020, 2021, 2022, 2023, 2024 (the catalog's model; the bulletin names a series or trim of it) |
| MACK CHU | 2017 to 2018 |
| MACK CXU | 2017 to 2018 |
| MACK GRANITE (GR) | 2019, 2020, 2021, 2022, 2023, 2024 (the catalog's model; the bulletin names a series or trim of it) |
| MACK GRANITE (GU) | 2017, 2018, 2019 (the catalog's model; the bulletin names a series or trim of it) |
| MACK LR | 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 |
| MACK MRU | 2017 to 2018 |
| MACK PINNACLE (PI/PN) | 2018, 2019, 2020, 2021, 2022, 2023, 2024 (the catalog's model; the bulletin names a series or trim of it) |
| MACK TERRAPRO (TE) | 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 (the catalog's model; the bulletin names a series or trim of it) |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 24V792000 | 2024-10-23. ELECTRICAL SYSTEM:SOFTWARE; SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE |
|---|---|
| 2024194 | 2024-03-27. Electrical |
| 24V232000 | 2024-03-27. ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS |
| 2023630 | 2023-11-22. Electrical |
| 23V310000 | 2023-05-02. ELECTRICAL SYSTEM:HORN |
| 2023021 | 2023-01-24. Electrical |
| 18V152000 | 2018-03-06. INTERIOR LIGHTING; VISIBILITY:WINDSHIELD WIPER/WASHER; EXTERIOR LIGHTING; ELECTRICAL SYSTEM |
| 2017216 | 2017-04-19. Electrical |
| 17V261000 | 2017-04-18. ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| CBR 159 202608 | 2026-09-01. Service bulletin. Mack Trucks Equipped With A Cummins Engine - Engine Preheat Icon Does Not Illuminate In The Instrument Cluster (IC) During Engine Pre-heat (Intake Air Heater) Operation - Vehicles With 2018Instrument Cluster Update, Model Year2018 And Newer |
|---|---|
| CBR 2712-7 032026 | 2026-04-02. Service bulletin. CBR - No Start Condition After Over the Air Programing. |
| S4342 022026 | 2026-03-03. Service campaign. SC - Mack Trucks has determined that a select group of trucks were built with an AHI Module fuel pressure sensor which does not meet our specifications. |
| CBR 126 022026 | 2026-03-03. Service bulletin. CBR - The purpose of this solution is to give information on Engine Control Module (EMS) Software content. |
| CBR 2128-7 202601 | 2026-02-03. Service bulletin. CBR - Engine Control Module (EMS) Software Information - Improvement List (Change Log), US21+OBD2021 Emissions ONLY |
| CBR 2495-4 202511 | 2025-12-03. Service bulletin. CBR - Carb 24 Phase 1 - 48V Diagnostics Guide. |
| CBR 2171-11 202511 | 2025-12-03. Service bulletin. CBR - Mack Temperature Sensor Troubleshooting Guide |
| CBR 2495 092025 | 2025-10-01. Service bulletin. The purpose of the 48V EATS heater system is to provide additional heat to the exhaust stream allowing the EATS to become active earlier during acold start and during engine operation that produces low exhaust gas temperatures. |
| CBR 2172-5 082025 | 2025-09-02. Service bulletin. CBR - When an OTA (Over-The-Air) job starts to program the VECU blocks the starter relay out, if the job ends in a Critical failure, the vehicle will remain in Safe State. |
| CBR 407 072025 | 2025-08-04. Service bulletin. CBR - To correct the MID136 SID 66 FMI 7 fault code the latest Bendix VCP file will need to downloaded. |