WenmarOpen by Wenmar Pro

Service bulletin B270220

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id11002858
Published by NHTSA2024-07-02
Manufacturer's numberB270220
Manufacturer's date2024-06-28
NHTSA componentPOWER TRAIN

NHTSA's summary

There is a jerking or shuddering during either or both of the following: Cornering or accelerating from low speeds Driving with low to medium loads There are no warning lights or Check Control messages.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Transmission and driveline

Vehicles listed
BMW 330I2024
BMW 530I2024
BMW 740I2024
BMW 8 SERIES2023
BMW X32024
BMW X42024
BMW X52024
BMW X62024
BMW X72023

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
B3303252025-09-15. Service campaign. The rear right driven half-shaft (aka output shaft/driven shaft) may not have been manufactured correctly during production and may break. In the event of a failure, there could be significant noises in the area of the rear axle and the driving performance will be noticeably reduced.
B2402242025-04-29. Service campaign. Due to a manufacturing issue, the torque on the bolts of the transmission Mechatronics was not carried outaccording to the specification. The faulty torquing can cause a malfunction within the transmission, and as a result, the emergencyoperation of the transmission.
B1109242025-01-25. Service campaign. During manufacturing, the dual-mass flywheel has not been sufficiently greased. The insufficient grease may result in acoustic abnormalities and vibrations in the vehicle's powertrain.
B2702202024-09-02. Service bulletin. There is a jerking or shuddering during either or both of the following: Cornering or accelerating from low speeds Driving with low to medium loads There are no warning lights or Check Control messages.
B2402242024-09-01. Service campaign. Due to a manufacturing issue, the torque on the bolts of the transmission Mechatronics was not carried outaccording to the specification. The faulty torquing can cause a malfunction within the transmission, and as a result, the emergencyoperation of the transmission.
B3701242024-07-25. Service bulletin. While driving at low speeds (15-40 mph) on flat road surfaces, a knocking noise from the front axle may beheard during steering wheel movements.
B2702202024-05-29. Service bulletin. There is a jerking or shuddering during either or both of the following: Cornering or accelerating from low speeds Driving with low to medium loads There are no warning lights or Check Control messages.
B2402242024-04-01. Service bulletin. BMW AG has issued a Delivery Stop (effective March 15, 2024) on a small number of Model Year 2024 BMW vehicles that were produced between January 30, 2024, and March 7, 2024.
B4108222023-12-06. Service bulletin. BMW AG has issued a Delivery Stop (effective December 21, 2022) on a small number of Model Year 2023BMW X7 SAV vehicles that were produced between September 1, 2022 and December 3, 2022. During assembly of the vehicle, a heat shield was mistakenly installed above the transmission. Note: No heat shield should have been installed. It may contact other components in the narrowspace along the bottom of the transmission tunnel.
MCAS40232023-10-01. Service bulletin. BMW AG has requested the inspection of all dealer stock of the following part number(s) listed below to ensure the spacer is conformed to drawing.