WenmarOpen by Wenmar Pro

Service bulletin S2323000017

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10247952
Published by NHTSA2024-01-02
Manufacturer's numberS2323000017
Manufacturer's date2023-02-14
NHTSA componentPOWER TRAIN

NHTSA's summary

Enabling A New Power Side Step Module.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Transmission and driveline

Vehicles listed
JEEP GRAND WAGONEER2022, 2023
JEEP WAGONEER2022, 2023
RAM 15002019, 2020, 2021, 2022, 2023

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
26V4130002026-06-30. POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL)
20243252024-06-06. Powertrain
24V4130002024-06-06. POWER TRAIN:MANUAL TRANSMISSION; POWER TRAIN:AUTOMATIC TRANSMISSION
23V2650002023-04-13. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
20204012020-08-28. Powertrain
20V0800002020-02-13. POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE)
20192062019-04-26. Powertrain
19V3240002019-04-25. POWER TRAIN:DRIVELINE:DRIVESHAFT
18V5560002018-08-23. POWER TRAIN:AXLE ASSEMBLY

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
S26210000042026-10-07. Service bulletin. The Customer May Complain About a Popping Noise, Grinding Noise, or an Intermittent No Reverse or Forward Transmission Engagement. The Tech May Find Damaged and/or Worn Transmission Output Shaft Splines (850RE Transmission Only)
18-069-262026-07-29. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **U0104-00 - Lost Communication With Cruise Control Module (NA Market Only) (In Active or Stored status). ● U0405-00 - Invalid Data Received From Cruise Control Module (NA Market Only) (In Active or Stored status). NOTE: Vehicles setting DTCs U0405-00 and U0104-00 may experience an inability to be cleared.** ● P0111-00 - Intake Air Temperature Sensor 1 Circuit Range Performance Bank 1 (In Active or Stored status). ● P0071-00 - Ambient Air Temperature Sensor Performance (In Active or Stored status). ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low (In Active or Stored status). ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High (In Active or Stored status). ● P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or (In Active or Stored status). ● P25E4-00 - B Camshaft Position - Unable To Achieve Locked Position Bank 1 (In Active or Stored status). ● U0673-00 - Lost Communication With Ion Sense Module (In Active or Stored status). ● P05BD-00 - Stop-Start Mode Switch Range/Performance (In Active or Stored status). ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/stuck Off (In Active or Stored status). ● P0116-00 - Engine Coolant Temperature Sensor 1 Performance (In Active or Stored status). ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking (In Active or Stored status). ● P0325-00 - Knock/Combustion Vibration Sensor 1 Circuit (In Active or Stored status). ● P0330-00 - Knock/Combustion Vibration Sensor 2 Circuit (In Active or Stored status). ● P032A-00 - Knock - Combustion Vibration Sensor C Circuit (In Active or Stored status). ● P062B-00 - Internal Control Module Fuel Injector Control Performance (In Active or Stored status). This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
18-068-262026-07-23. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **U0405-00 - Invalid Data Received From Cruise Control Module. ● U0104-00 - Lost Communication With Cruise Control Module. NOTE: Vehicles setting DTCs U0405-00 and U0104-00 may experience an inability to be cleared.** ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. ● P06DD-00 - Engine Oil Pressure Control Circuit Stuck Off. ● P0604-00 - Internal Control Module Random Access Memory Ram Error. ● P060C-00 - Internal Control Module Main Processor Performance. This bulletin involves reprogramming the PCM with the latest available software.
21-057-262026-07-18. Service bulletin. Flash: Transmission Control Module (TCM) Updates Customers may comment on one or more of the following: SYMPTOM: ● Harsh or slipping feeling during upshifts (1st - 5th). ● Harsh or slipping feeling during kickdown events under throttle. ● Transmission fluid odor (burnt smell). This bulletin involves reprogramming the TCM with the latest available software.
21-056-262026-07-18. Service bulletin. Flash: Transmission Control Module (TCM) Updates Customers may comment on one or more of the following: SYMPTOM: ● **Harsh or slipping feeling during upshifts (1st - 5th). ● Harsh or slipping feeling during kickdown events under throttle. ● Transmission fluid odor (burnt smell).** ● During a 2 - 3 transmission upshift, the engine is hitting rev limit. ● Hesitation feel during a pedal tip in, while engine is warming up below 1 °C (30 °F) ambient temp. This bulletin involves reprogramming the TCM with the latest available software.
21-054-262026-07-18. Service bulletin. Flash: Transmission Control Module (TCM) Updates Customers may comment on one or more of the following: SYMPTOM: ● Harsh or slipping feeling during upshifts (1st - 5th). ● Harsh or slipping feeling during kickdown events under throttle. ● Transmission fluid odor (burnt smell).
S2621000003 REV.A2026-03-18. Service bulletin. The vehicle will exhibit a service transmission/check engine warning indicator for the following transmission models: 845RE, 8HP45, 850RE, 8HP50, 8HP70, 8HP75, 8HP75-PHEV, 8HP75-LCV, 8HP90, 8HP95. Transmissions may exhibit the following diagnostic codes: P07E4, P1DB2, P0716, P1B14, P0733, P1D90, P1DB7, P1B13.
S26210000032026-03-05. Service bulletin. Service transmission/check engine warning indicator for the 850RE, 8HP50, 8HP70, 8HP75, 8HP75-PHEV transmissions that have fault codes P07E4, P1DB2, P0716, P1B14, P0733, P1D90, P1DB7, P1B13.
08-417-252026-01-07. Service bulletin. Drivetrain Control Module (DTCM) Software Update Customers may experience one or more of the following: ● Rear axle bind during slow speed turning. Feels like the 4WD is active. ● While moving above 5 kph (3.1 mph) transmission goes into limp mode. This bulletin involves flashing the DTCM to the latest software level.
9100672 Rev 32025-10-29. Service bulletin. Replacement components for transfer case are no longer available. To repair issue, use the following part numbers and follow the I-sheet instructions for assembly: 68738079AA - HOUSING 68738084AA - CAM 68738085AA - GEAR 68737112AA - PLATE Please note that the part numbers listed here are transfer case components, not full transfer case part numbers.