WenmarOpen by Wenmar Pro

Service bulletin PC989 2019-2020

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10246454
Published by NHTSA2023-12-08
Manufacturer's numberPC989 2019-2020
Manufacturer's date2023-11-09
NHTSA componentSTRUCTURE

NHTSA's summary

Active Grille Shutter Emission Warranty Extension Dealer Notification *****Dealer Announcement***** Nissan is committed to providing the highest levels of product quality and customer satisfaction. Therefore, Nissan is extending the emission warranty coverage on the model year 2019-2020 Altima Active Grille Shutter to 15 Years or 150,000 miles, whichever occurs first. All other warranty terms, limitations, and conditions remain unchanged. On affected vehicles, over time, the shaft connecting the grille shutter motor and shutter louvers may become twisted and/or cracked resulting in the shutter remaining in the closed position and illumination of the malfunction indicator light (MIL). This issue will have no effect on vehicle safety or drivability, but the vehicle may experience reduced fuel efficiency. During the limited emission warranty extension period, owners are eligible for free replacement of the Active Grille Shutter if a MIL-On condition occurs with DTC P059F and/or P159F that requires replacement of the grille shutter assembly. Owners of eligible vehicles will receive notification of this limited emission warranty extension during December 2023. ***** What Dealers Should Do ***** 1. Verify if vehicles are eligible for this Warranty Extension using the warranty extension page of Service Comm. 2. If a customer contacts the dealer with an Active Grille Shutter concern in an owned or leased vehicle, dealers should use the ESM to diagnose the root cause of the customer concern and identify the correct repair to resolve the customer concerns. NOTE: Dealers will need to follow the warranty process and obtain pre-approval when the repair cost exceeds a Dealer’s Claims Administration/Authorization Limits (DCAL). 3. The service department should submit the applicable warranty claim for the action performed.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Body and frame

Trouble codes named

P059F, P159F

Vehicles listed
NISSAN ALTIMA2019, 2020

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
NTB09-131C2026-04-29. Service bulletin. CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).
NTB09-131C2026-04-29. Service bulletin. CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).
NTB20-010C2023-03-07. Service bulletin. WINDSHIELD WIPER BLADE PERFORMANCE/DIAGNOSIS SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB13-028H2023-03-07. Service bulletin. REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB09-081J2023-03-07. Service bulletin. WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.