Service bulletin TSB_CLI053
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10240757 |
| Published by NHTSA | 2023-08-24 |
| Manufacturer's number | TSB_CLI053 |
| Manufacturer's date | 2023-08-14 |
| NHTSA component | VISIBILITY; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM |
NHTSA's summary
TECHNICAL SERVICE BULLETIN: HVAC BLOWER MOTOR CONNECTOR REPLACEMENT - This bulletin provides information to replace the Heating, Ventilation, and Air Conditioning (HVAC) blower motor connector on some 2019-2023MY Forte (BDm) vehicles produced from July 09, 2018 through present, which may experience the air conditioning function inoperative. The blower motor connector pins may have poor pin tension. Poor pin tension occurs when the female pin is slightly open which will not allow for a proper electrical connection. While driving, the road conditions can cause the connector pin to slightly move within the connector and will intermittently contact the male pin. This may cause excessive circuit resistance, causing the blower motor to become inoperative.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Glass, wipers and mirrors, Heating and air conditioning
| KIA FORTE | 2019, 2020, 2021, 2022, 2023 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| TSB_CLI053_R1 | 2023-11-03. Service bulletin. TECHNICAL SERVICE BULLETIN: HVAC BLOWER MOTOR CONNECTOR REPLACEMENT - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to replace the Heating, Ventilation, and Air Conditioning (HVAC) blower motor connector on some 2019-2023MY Forte (BDm) vehicles produced from July 09, 2018 through present, which may experience the air conditioning function inoperative. The blower motor connector pins may have poor pin tension. Poor pin tension occurs when the female pin is slightly open which will not allow for a proper electrical connection. While driving, the road conditions can cause the connector pin to slightly move within the connector and will intermittently make contact with the male pin. This can cause excessive circuit resistance, causing the blower motor to become inoperative. Follow the procedure outlined in this publication to replace the HVAC blower motor connector. |
|---|---|
| TSB_CLI048_R1 | 2022-12-06. Service bulletin. TECHNICAL SERVICE BULLETIN: PARTIAL REPAIR: COMPRESSOR FIELD COIL ASSEMBLY INSPECTION AND REPLACEMENT - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information regarding A/C Compressor Field Coil Assembly inspection and replacement on some 2017-2018MY Forte (YDm) and 2019-2023MY Forte (BDm) vehicles. |
| PS299_R4 | 2020-11-03. Service bulletin. PITSTOP: CORRECT PROCEDURE FOR RAISING WINDSHIELD WIPERS - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. When servicing windshield wipers on the below listed vehicles, including during PDI, ensure to raise the wiper arms to a vertical position to avoid damaging the paint on the rear edge of the hood. |
| TSB_CLI048 | 2020-05-05. Service bulletin. TECHNICAL SERVICE BULLETIN: - PARTIAL REPAIR; COMPRESSOR FIELD COIL ASSEMBLY INSPECTION AND REPLACEMENT - This bulletin provides information regarding A/C Compressor Field Coil Assembly inspection and replacement on some 2017-2020 Forte (YDm, BDm) vehicles. Follow the diagnostic procedures in this bulletin to isolate air conditioning compressor faults such as open field coil circuit. Kia has made the Field Coil/Bolt available as serviceable item. |
| PS299_R3 | 2018-10-09. Service bulletin. PITSTOP - CORRECT PROCEDURE FOR RAISING WINDSHIELD WIPERS - When servicing the windshield wipers on the listed vehicles below during PDI, make sure to use the procedure outlined below to raise the wiper arms to the fully vertical position in order to avoid damaging the paint on the rear edge of the hood. It is important to note that the wipers on these vehicles are recessed under the hood to provide better appearance and reduced wind noise characteristics. This procedure applies to both key start and SMK type ignition systems. |