Service bulletin IK1200101
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10234015 |
| Published by NHTSA | 2023-04-07 |
| Manufacturer's number | IK1200101 |
| Manufacturer's date | 2023-03-23 |
| NHTSA component | ENGINE AND ENGINE COOLING |
NHTSA's summary
Cummins Programming guide and fault codes285 & 265; only vehicles built with Cummins B6.7, X15, or L9 engines
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Engine
| IC BUS 1300 FBC | 2018 to 2019 |
|---|---|
| IC BUS 1300 FBC | 2023 |
| IC BUS AC | 2014 to 2016 |
| IC BUS AE | 2014 to 2015 |
| IC BUS BE | 2014 to 2019 |
| IC BUS CASB | 2014 to 2015 |
| IC BUS CE | 2014 to 2023 |
| IC BUS CE SBUS | 2022 to 2023 |
| IC BUS CESB | 2014 to 2024 |
| IC BUS HC | 2014 to 2019 |
| IC BUS PB105 | 2019 |
| IC BUS PB105 | 2023 |
| IC BUS RE | 2018 |
| IC BUS RE | 2022 to 2023 |
| IC BUS RECB | 2014 to 2021 |
| IC BUS RESB | 2014 to 2017 |
| IC BUS RESB | 2019 to 2023 |
| IC BUS TC | 2019 to 2023 |
| INTERNATIONAL 1300 | 2016 |
| INTERNATIONAL 3000 | 2014 |
| INTERNATIONAL 4000 SERIES 4300 | 2017 to 2018 |
| INTERNATIONAL 4300 | 2014 |
| INTERNATIONAL 4300 | 2018 |
| INTERNATIONAL 4400 | 2014 |
| INTERNATIONAL 7500 | 2014 |
| INTERNATIONAL 9900 | 2014 to 2019 |
| INTERNATIONAL 9900I | 2016 to 2018 |
| INTERNATIONAL DURASTAR | 2014 to 2020 |
| INTERNATIONAL HV | 2017 to 2024 |
| INTERNATIONAL HX | 2016 to 2024 |
| INTERNATIONAL LONESTAR | 2014 |
| INTERNATIONAL LONESTAR | 2015 |
| INTERNATIONAL LONESTAR | 2016 to 2023 |
| INTERNATIONAL LT | 2016 to 2024 |
| INTERNATIONAL MV | 2017 to 2024 |
| INTERNATIONAL PAYSTAR | 2014 to 2019 |
| INTERNATIONAL PROSTAR | 2014 |
| INTERNATIONAL PROSTAR | 2015 |
| INTERNATIONAL PROSTAR | 2016 to 2019 |
| INTERNATIONAL RH | 2016 to 2024 |
| INTERNATIONAL TRANSTAR | 2014 to 2019 |
| INTERNATIONAL WORKSTAR | 2014, 2015 |
| INTERNATIONAL WORKSTAR | 2016 to 2020 |
| INTERNATIONAL WORKSTAR | 2022 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 20V810000 | 2020-12-23. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE |
|---|---|
| 2015546 | 2015-11-18. Engine |
| 15V329000 | 2015-05-29. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| IK2600300 | 2026-03-04. Service bulletin. This article equips technicians with the knowledge and steps needed to efficiently replace and program N9/N10 and N13 modules, while addressing potential baud rate incompatibility issues between the replacement module and the vehicle. |
|---|---|
| IK2600284 | 2026-02-05. Service bulletin. This document aims to enable technicians to: 1. Accurately identify third generation MaxxForce medium duty engine control systems. 2. Understand the programming intricacies related to these systems. 3. Autonomously execute programming tasks without needing technical support. |
| IK2600283 | 2026-02-05. Service bulletin. This document aims to enable technicians to: 1. Accurately identify N-series medium duty engine control systems. 2. Understand the programming intricacies related to these systems. 3. Autonomously execute programming tasks without needing technical support. |
| IK2600256 | 2026-02-05. Service bulletin. This article is intended to provide information for how to program International Engines that have been sold to another company and installed in a chassis that does NOT have an International VIN Number. This may include Detroit Series 40 engines, Perkins, Street Sweepers, Cranes, Fire Trucks, Generators, Blower motors, and more. |
| IK2600255 | 2026-02-05. Other. This document provides guidance for assessing the feasibility of implementing a customer-requested change to an engine or vehicle parameter/feature. Customer requested changes will be approved in accordance with the requirements specified in 40 CFR Part 1037 to ensure continued compliance with greenhouse gas (GHG) regulations. |
| IK2600090 | 2026-02-05. Other. New CARB Idle Reduction Change Request |
| IK2600047 | 2026-02-05. Service bulletin. Engine replacements for all International engines will need to follow this procedure. |
| IK08000403 | 2024-05-02. Service bulletin. This document details the procedure that must be followed to ensure proper alternator troubleshooting. |
| IK0800407 | 2024-03-06. Service bulletin. Starter Diagnostics and warranty claim procedure; all engines EXCLUDING Cummins ISB engine with Allison transmission or PSI engine. |
| IK1201476 | 2023-11-06. Service bulletin. Rebuilding Cylinder Heads on Certain MaxxForce 11/13, N13, and A26 engines; 2010 to present. |