WenmarOpen by Wenmar Pro

Service bulletin 2301821

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10230106
Published by NHTSA2023-01-17
Manufacturer's number2301821
Manufacturer's date2021-05-08
NHTSA componentFORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA

NHTSA's summary

Forward Facing Camera Bracket Delaminates From Windshield This bulletin involves Inspecting the urethane used to mount the IRCM (Integrated Radar Camera Module) bracket andreplacing the windshield if necessary. The customer may comment on the following: Forward facing camera bracket loses adhesion with the windshield. There is a warning message with MIL light illumination and that the advanceddriver assist features are inoperative

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Driver assistance

Vehicles listed
RAM 15002021

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
24V6530002024-09-05. ELECTRONIC STABILITY CONTROL (ESC):CONTROL MODULE; SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE
23V0590002023-02-09. BACK OVER PREVENTION:DISPLAY FUNCTION
22V6380002022-08-25. BACK OVER PREVENTION:DISPLAY FUNCTION
21V9180002021-11-23. STEERING:STEERING CONTROL MODULE; BACK OVER PREVENTION:DISPLAY FUNCTION
21V4380002021-06-10. BACK OVER PREVENTION:DISPLAY FUNCTION

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
9100274 Rev 12026-08-06. Service bulletin. Blindspot Module For concern on Blindspot Module setting U11FB-00 Lost Communication with Left Blind Spot Sensor, U11FA-00 Lost Communication with Right Blind Spot Sensor. Some vehicle(s) where the Blindspot Module was replaced had no issues found with the Blindspot Module after testing. Please verify no wiring or connector issues are present prior to module replacement.
1032892025-03-04. Service bulletin. CAMERA - REAR VIEW
1032882025-03-04. Service bulletin. CAMERA - REAR VIEW
S258A0000062025-02-15. Service bulletin. Rear ParkView Backup Camera Guidelines Not Appearing On Radio
S2208000045 REV.B2024-12-11. Service bulletin. Backup Camera Poor Image Quality Inspection
08032242024-03-18. Service bulletin. Battery Pack Control Module (BPCM) Software Update Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTC)s have been set: ? P0AC0 - Hybrid Battery Pack Current Sensor 1 Circuit Performance. ? P1A29 - Cell Supervisory Circuit A Failure. ? P0DE7 - Hybrid/EV Battery Pack Cell Voltage High. ? P0ABA - Voltage Sense A Circuit. ? P0B3D - Hybrid Battery Voltage Sense "A" Circuit Low. ? P0B3E - Hybrid Battery Voltage Sense "A" Circuit High. ? U3017 - Control Module Timer/Clock Performance. ? P0E55 - DC/DC Converter Current Sensor Circuit "A". ? P0DAF - Hybrid/EV Battery Cell Balancing Circuit "A". ? P0AD4 - Hybrid Battery Pack Air Flow System Insufficient Air Flow. This bulletin involves updating the BPCM with the latest available software.
09001242024-03-18. Service bulletin. Cold Engine Ticking Noise The customer may describe a ticking noise from the exhaust manifold location(s) when cold. This bulletin involves replacing the exhaust manifolds.
91002742024-01-16. Service bulletin. Blindspot Module For concern on Blindspot Module setting U11FB-00 Lost Communication with Left Blind Spot Sensor, U11FA-00 Lost Communication with Right Blind Spot Sensor. Some vehicle(s) where the Blindspot Module was replaced had no issues found with the Blindspot Module after testing. Please verify no wiring or connector issues are present prior to module replacement. Prior to replacing the Blindspot Module, Please Contact Engineering: FCA REDACTED CONTENT If no response in 15 minutes, please proceed with repair.
08064232024-01-02. Service bulletin. Radio Over The Air Updating to QR40.12 Software Version Mobile Wi-Fi inoperative upon start up. ? Hotspot gives 9No Internet9 connection message on phone, when trying to connect to a device. This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from QR39.7 to QR40.12. NOTE: National launch for this FOTA update is expected to begin March 10, 2023. DISCUSSION: Vehicles sold in the U.S. and Canada can now receive software updates ?over-the-air?. Updates to software will occur in a phased roll-out. The software is updated through the built-in cellular modem in the radio.
18016232024-01-02. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more ofthe following DTCs:P0335 - Crankshaft Position Sensor Circuit. P0339 - Crankshaft Position Sensor Intermittent. Other software enhancement included with this update: Idle stability improvements during Electronic Stability Control (ESC) events.