NHTSA recall 22V638000
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | NHTSA (United States) |
|---|---|
| Campaign number | 22V638000 |
| Manufacturer's number | Z86 |
| Manufacturer | Chrysler (FCA US, LLC) |
| Reported | 2022-08-25 |
| Owners notified | 2022-10-06 |
| Component | BACK OVER PREVENTION:DISPLAY FUNCTION |
| Units potentially affected | 7895 |
| Part numbers | 68428546AD, 68428547AD, 68474392AE, 68474393AE, 68428539AC, 68428540AC, 68467271AC, 68467272AC, 68467716AD, 68467717AD |
| Report | Annual report 1, for 2024 quarter 4 to 2025 quarter 3 |
|---|---|
| Filed with NHTSA | 2025-10-25 |
| Vehicles in the campaign | 7895 |
| Reported remedied | 6870 (87%) |
| Reported unreachable | 65 |
| Reported removed | 117 |
These are the manufacturer's totals for the whole campaign at the end of 2025 quarter 3, as filed with NHTSA. They do not say whether one vehicle has been remedied: check the VIN with the official lookups. The reports are from data as of 2026-10-19.
What is wrong
Chrysler (FCA US, LLC) is recalling certain 2020-2021 Jeep Wrangler, RAM 1500 and 2021 Jeep Gladiator vehicles. A radio software error may prevent the rearview image from displaying. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
What can happen
A rearview camera that does not display an image reduces the driver's rear view, increasing the risk of a crash.
The remedy
Dealers will update the radio software, free of charge. Owner notification letters were mailed October 6, 2022. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA, LLC's number for this recall is Z86.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
| 2021 JEEP GLADIATOR | |
|---|---|
| 2020 JEEP WRANGLER | |
| 2021 JEEP WRANGLER | |
| 2020 RAM 1500 | |
| 2021 RAM 1500 |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| 96C Combo | 2025-09-24. Service campaign. Customer Satisfaction Notification 96C – Park Assis Module - Dealer Notification |
|---|---|
| 103289 | 2025-03-04. Service bulletin. CAMERA - REAR VIEW |
| S248A000016 | 2024-12-17. Service bulletin. Customer complaints regarding rear view camera inoperative or flickering blue radio screen display while transmission is in reverse or blank screens when selecting the rear camera view following a recent service repair involving the removal and installation of the rear spare tire carrier |
| S2208000045 REV.B | 2024-12-11. Service bulletin. Backup Camera Poor Image Quality Inspection |
| 0803224 | 2024-03-18. Service bulletin. Battery Pack Control Module (BPCM) Software Update Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTC)s have been set: ? P0AC0 - Hybrid Battery Pack Current Sensor 1 Circuit Performance. ? P1A29 - Cell Supervisory Circuit A Failure. ? P0DE7 - Hybrid/EV Battery Pack Cell Voltage High. ? P0ABA - Voltage Sense A Circuit. ? P0B3D - Hybrid Battery Voltage Sense "A" Circuit Low. ? P0B3E - Hybrid Battery Voltage Sense "A" Circuit High. ? U3017 - Control Module Timer/Clock Performance. ? P0E55 - DC/DC Converter Current Sensor Circuit "A". ? P0DAF - Hybrid/EV Battery Cell Balancing Circuit "A". ? P0AD4 - Hybrid Battery Pack Air Flow System Insufficient Air Flow. This bulletin involves updating the BPCM with the latest available software. |
| 0300224 | 2024-03-18. Service bulletin. Front and Rear Axle Sensor Kit **Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Code (DTC) has been set: ? C1451-11 - Service Axle Locker System** Customers may also comment on a Service Axle Locker message displayed in the Electronic Vehicle Information Center (EVIC) for this condition. |
| 0900124 | 2024-03-18. Service bulletin. Cold Engine Ticking Noise The customer may describe a ticking noise from the exhaust manifold location(s) when cold. This bulletin involves replacing the exhaust manifolds. |
| S2319000007 | 2024-01-08. Service bulletin. Squeak Noise From Dash Area When Turning The Steering Wheel. |
| 0806423 | 2024-01-02. Service bulletin. Radio Over The Air Updating to QR40.12 Software Version Mobile Wi-Fi inoperative upon start up. ? Hotspot gives 9No Internet9 connection message on phone, when trying to connect to a device. This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from QR39.7 to QR40.12. NOTE: National launch for this FOTA update is expected to begin March 10, 2023. DISCUSSION: Vehicles sold in the U.S. and Canada can now receive software updates ?over-the-air?. Updates to software will occur in a phased roll-out. The software is updated through the built-in cellular modem in the radio. |
| 0804823 | 2024-01-02. Service bulletin. Flash: Battery Pack Control Module (BPCM) Diagnostic and System Updates Customers may experience a false Malfunction Indicator Lamp (MIL) illumination related to PHEV battery: ? P1A21-00 - HV Battery Contactor Control Sequence Incorrect. ? P0B3E-00 - Hybrid/EV Battery Voltage Sense 1 Circuit High. ? P0607-00 - ECU Internal Performance. ? P1E1B-00 - Hybrid/EV Battery Side Voltage System Isolation. ? P0AA4-00 - Hybrid Battery Negative Contactor Circuit Stuck Closed. ? P1C00-00 - Hybrid/EV Battery Voltage Sense 1 Out Of Range Low. ? P1C01-00 - Hybrid/EV Battery Voltage Sense 1 Out Of Range High. ? P1A9B-00 - Hybrid/EV Battery Temperature Sensor 1 Out Of Range High. ? P0BBD-00 - Hybrid Battery Pack Voltage Variation Exceeded Limit. ? P167B-00 - Controlled System Shutdown. ? U1885-00 - Battery Energy Control Module Lost Communication With HCP. ? P0EDD-00 - Hybrid/EV Battery Pack B Deterioration. ? U0111 - Lost Communication With Hybrid Battery Pack Sensor Module. ? P0CA7-00 - Hybrid/EV Battery Discharging Current High. ? P1A0C-00 - Battery Energy Control Module System Voltage Low. This bulletin involves updating the BPCM with the latest available software. NOTE: Additional module flashes are required for this update to be effective, the following modules are all to be updated along with this BPCM update: ? Powertrain Control Module (PCM). ? Integrated Dual Charging Module (IDCM). ? Transmission Control Module (TCM). ? Battery Pack Control Module (BPCM). ? Hybrid Control Processor (HCP), Auxiliary Hybrid Control Processor (AHCP) also known as the Power Inverter Module (PIM). |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.