Service bulletin 9004335
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10224003 |
| Published by NHTSA | 2022-10-17 |
| Manufacturer's number | 9004335 |
| Manufacturer's date | 2020-11-25 |
| NHTSA component | POWER TRAIN |
NHTSA's summary
Turbocharger If the turbo is being replaced for an oil leak concern, please inspect the area around the turbo oil feed o-ring for a leak. The o-ring is serviced separately and complete turbo replacement may not be necessary.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Transmission and driveline
| ALFA ROMEO GIULIA | 2017 to 2020 |
|---|---|
| ALFA ROMEO STELVIO | 2018, 2019, 2020 |
| JEEP CHEROKEE | 2019, 2020 |
| JEEP WRANGLER | 2018, 2019, 2020 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 2026224 | 2026-05-07. Powertrain |
|---|---|
| 26V290000 | 2026-05-07. POWER TRAIN |
| 2025012 | 2025-01-16. Powertrain |
| 25V011000 | 2025-01-16. POWER TRAIN |
| 2023089 | 2023-02-23. Powertrain |
| 23V116000 | 2023-02-23. POWER TRAIN:CLUTCH ASSEMBLY |
| 2021035 | 2021-01-28. Powertrain |
| 21V028000 | 2021-01-28. POWER TRAIN:CLUTCH ASSEMBLY |
| 2020083 | 2020-03-03. Powertrain |
| 20V124000 | 2020-03-03. POWER TRAIN:CLUTCH ASSEMBLY |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| S2621000004 | 2026-10-07. Service bulletin. The Customer May Complain About a Popping Noise, Grinding Noise, or an Intermittent No Reverse or Forward Transmission Engagement. The Tech May Find Damaged and/or Worn Transmission Output Shaft Splines (850RE Transmission Only) |
|---|---|
| 03-001-26 | 2026-07-18. Service bulletin. Unable to Complete 01C Recall Drive Cycle C14A7-97 Active Technicians may experience the following: SYMPTOM: ● After performing Recall 01C, the vehicle may get a 'Service AWD' message on the EVIC. |
| 18-062-26 | 2026-07-02. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0420 - Catalyst System Efficiency Below Threshold Bank 1. ● P0430 - Catalyst System Efficiency Below Threshold Bank 2.** ● P0456 - EVAP System Small Leak. Customers may also comment on one or more of the following: ● **Vehicle fails emissions inspection testing.** ● Pinging/detonation sound from the engine after warm up at 1000-1500 RPM at low speed. (EMEA and APAC Only). ● The vehicle stalls at low speeds and/or coming to a stop This bulletin involves reprogramming the PCM with the latest available software. |
| 14082 | 2026-04-15. Warranty extension. (XX1) Two Speed Power Transfer Unit (PTU) - Select 2017 - 2019 Jeep Cherokee (KL) |
| 14081 | 2026-04-15. Warranty extension. (XX1) Two Speed Power Transfer Unit (PTU) - Select 2017 - 2019 Jeep Cherokee (KL) |
| 14079 | 2026-04-15. Warranty extension. (XX1) Two Speed Power Transfer Unit (PTU) - Select 2017 - 2019 Jeep Cherokee (KL) |
| 14078 | 2026-04-15. Warranty extension. (XX1) Two Speed Power Transfer Unit (PTU) - Select 2017 - 2019 Jeep Cherokee (KL) |
| 111447 | 2026-04-15. Warranty extension. ID-26-19 (XX1) Two Speed Power Transfer Unit (PTU) - Select 2017 - 2019 Jeep Cherokee (KL) |
| 111432 | 2026-04-15. Warranty extension. D-26-10 (XX1) Two Speed Power Transfer Unit (PTU) - Select 2017 - 2019 Jeep Cherokee (KL) |
| 21-027-26 REV. A | 2026-04-15. Service bulletin. Two Speed Power Transfer Unit Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): ? C1494-07 - PTU Fork Position-Mechanincal Failures. Customers m |