WenmarOpen by Wenmar Pro

Service bulletin 9002688

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10216418
Published by NHTSA2022-07-25
Manufacturer's number9002688
Manufacturer's date2013-02-13
NHTSA componentWHEELS; ENGINE AND ENGINE COOLING

NHTSA's summary

68069384A$, R8069384A$, 68086182A$, R8027067A$, RL002012A$ - Gasket, Cylinder Head Cover Before replacing injectors for Diagnostic Trouble Codes P0201, P0202, P0203, P0204, P0205, and/or P0206, please make sure that the wiring loom and/or connector in the valve cover gasket is not the root cause to your concern. In addition, make sure that the wiring attaching nuts are torqued to their proper value.~

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Engine, Wheels

Trouble codes named

P0201, P0202, P0203, P0204, P0205, P0206

Vehicles listed
DODGE RAM 15002010, 2011, 2012 (the catalog's model; the bulletin names a series or trim of it)
DODGE RAM 25002010, 2011, 2012 (the catalog's model; the bulletin names a series or trim of it)
DODGE RAM 35002010, 2011, 2012 (the catalog's model; the bulletin names a series or trim of it)
DODGE RAM 45002011, 2012 (the catalog's model; the bulletin names a series or trim of it)
DODGE RAM 55002011, 2012 (the catalog's model; the bulletin names a series or trim of it)
RAM 15002009
RAM 25002009
RAM 35002007 to 2009
RAM 45002008 to 2009
RAM 55002008 to 2009
RAM redundant 45002010
RAM redundant 55002010

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
21V3980002021-05-27. WHEELS:LUGS/NUTS/BOLTS/STUDS
14V6350002014-10-08. ENGINE AND ENGINE COOLING:ENGINE:DIESEL; FUEL SYSTEM, DIESEL

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
1129062026-07-02. Service bulletin. BEARING - CRANKSHAFT THRUST and KIT
1129062026-07-02. Service bulletin. BEARING - CRANKSHAFT THRUST and KIT
18048232023-05-30. Service bulletin. wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
S21090000042023-01-17. Service bulletin. Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
9004374-12023-01-17. Service bulletin. NUT, Wheel Flange Wheel Nut Service Torque should be 175 N-M.
90043742023-01-17. Service bulletin. NUT, Wheel Flange Wheel Nut Service Torque should be 190 N-M.
S22090000042022-12-19. Service bulletin. If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
683328102022-10-17. Service bulletin. Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar® Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 N·m [21 ft. lbs.].
23031172022-10-17. Service bulletin. Wheel Liner to Steel Bumper Slip Fit Design This bulletin involves informing technicians that the wheel liners tabs are to be tucked behind the flange of the bumper bracket. No fasteners are used to attach the liner and the bumper when vehicle is equipped with a steel front bumper.
90028872022-10-17. Service bulletin. Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.