Service bulletin 9002829
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10216004 |
| Published by NHTSA | 2022-07-18 |
| Manufacturer's number | 9002829 |
| Manufacturer's date | 2013-05-08 |
| NHTSA component | SEATS; SEATS:FRONT ASSEMBLY:SEAT HEATER/COOLER |
NHTSA's summary
Part Description: Element Assy - Heated Seat Front Lt and Rt Issue Description: 2013 JK(Wrangler) vehicles built from 2013 Start Of Production 7/23/12 to 1/29/13 with heated seats that become inoperative at cold temperatures below 10 degrees.~ Dealers should NOT replace the Heated Seat Module 68138715AA. Dealers should order a new driver and passenger heated seat back pad to correct this issue when the WiTech indicates Diagnostic Trouble Code (DTC) B1092 or B1096. ~ Both driver and passenger HEATED SEAT BACK PAD parts should be replaced even if only one seat exhibits the issue.~ The repair entails removing the seat back trim cover, cutting off the pigtail of the original element and placing the replacement element part over the original part and making the electrical connection
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Seats
Trouble codes named
B1092, B1096
| JEEP WRANGLER | 2013 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 09-001-13 | 2022-07-25. Service bulletin. Gasoline Engine Diagnostic Inspection Procedure This bulletin provides a procedure to determine repair versus replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components. |
|---|---|
| 9002829 | 2021-03-15. Service bulletin. Part Description: Element Assy - Heated Seat Front Lt and Rt Issue Description: 2013 JK(Wrangler) vehicles built from 2013 Start Of Production 7/23/12 to 1/29/13 with heated seats that become inoperative at cold temperatures below 10 degrees.~ Dealers should NOT replace the Heated Seat Module 68138715AA. Dealers should order a new driver and passenger heated seat back pad to correct this issue when the WiTech indicates Diagnostic Trouble Code (DTC) B1092 or B1096. ~ Both driver and passenger HEATED SEAT BACK PAD parts should be replaced even if only one seat exhibits the issue.~ The repair entails removing the seat back trim cover, cutting off the pigtail of the original element and placing the replacement element part over the original part and making the electrical connection |
| 9003699 | 2018-06-11. Service bulletin. Heated Seat Elements; Cushion and Back DEALERCONNECT HEATED ELEMENT RESISTANCE INFO OUT IS OF SPEC. Prior to ordering any of the parts (55057300A$, 55057293A$, 55057301A$, 55057294A$) Please contact Micah Straub at cell phone# 248-613-2478 for further instructions. Leave a voice mail and your call will be returned promptly. 5.1 to 7.8 is the correct resistance value although ambient temperature will affect this value. Please call for detailed information. If no return call in 15 minutes, proceed with repair. |
| 9002829 | 2018-05-21. Service bulletin. Part Description: Element Assy - Heated Seat Front Lt and Rt Issue Description: 2013 JK(Wrangler) vehicles built from 2013 Start Of Production 7/23/12 to 1/29/13 with heated seats that become inoperative at cold temperatures below 10 degrees.~ Dealers should NOT replace the Heated Seat Module 68138715AA. Dealers should order a new driver and passenger heated seat back pad to correct this issue when the WiTech indicates Diagnostic Trouble Code (DTC) B1092 or B1096. ~ Both driver and passenger HEATED SEAT BACK PAD parts should be replaced even if only one seat exhibits the issue.~ The repair entails removing the seat back trim cover, cutting off the pigtail of the original element and placing the replacement element part over the original part and making the electrical connection |