Service bulletin 9003699
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10139994 |
| Published by NHTSA | 2018-06-11 |
| Manufacturer's number | 9003699 |
| Manufacturer's date | 2017-03-29 |
| NHTSA component | SEATS |
NHTSA's summary
Heated Seat Elements; Cushion and Back DEALERCONNECT HEATED ELEMENT RESISTANCE INFO OUT IS OF SPEC. Prior to ordering any of the parts (55057300A$, 55057293A$, 55057301A$, 55057294A$) Please contact Micah Straub at cell phone# 248-613-2478 for further instructions. Leave a voice mail and your call will be returned promptly. 5.1 to 7.8 is the correct resistance value although ambient temperature will affect this value. Please call for detailed information. If no return call in 15 minutes, proceed with repair.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Seats
| JEEP WRANGLER | 2013, 2014, 2015, 2016, 2017 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 2302914 | 2023-01-17. Service bulletin. Front Passenger Seat High Effort To Adjust Fore/Aft |
|---|---|
| 23-029-17 | 2022-09-15. Service bulletin. Dimpled Driver Side Front Leather Heated Seat This bulletin involves inspecting and installing heater element patches and replacing seat cushion cover, on the driver?s front seat. The customer may describe, the driver?s front leather seat has dimples in the seat bottom. The dimples are caused by openings in the heated seat element, seeFig. 1.Dimple Location On Leather Seats1 - Dimples |
| 23-028-17 | 2022-09-15. Service bulletin. Squeaking Noise Below The Front Seat While Turning and Going Over Bumps This bulletin involves replacing the bolt and bushing on driver and passenger side seat slide mechanism to resolve a squeaking issue (Two door models only). The customer may describe a squeak heard under the front passenger or driver side seat, while turning or driving over bumps. |
| 09-001-13 | 2022-07-25. Service bulletin. Gasoline Engine Diagnostic Inspection Procedure This bulletin provides a procedure to determine repair versus replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components. |
| 9002829 | 2022-07-18. Service bulletin. Part Description: Element Assy - Heated Seat Front Lt and Rt Issue Description: 2013 JK(Wrangler) vehicles built from 2013 Start Of Production 7/23/12 to 1/29/13 with heated seats that become inoperative at cold temperatures below 10 degrees.~ Dealers should NOT replace the Heated Seat Module 68138715AA. Dealers should order a new driver and passenger heated seat back pad to correct this issue when the WiTech indicates Diagnostic Trouble Code (DTC) B1092 or B1096. ~ Both driver and passenger HEATED SEAT BACK PAD parts should be replaced even if only one seat exhibits the issue.~ The repair entails removing the seat back trim cover, cutting off the pigtail of the original element and placing the replacement element part over the original part and making the electrical connection |
| 9002829 | 2021-03-15. Service bulletin. Part Description: Element Assy - Heated Seat Front Lt and Rt Issue Description: 2013 JK(Wrangler) vehicles built from 2013 Start Of Production 7/23/12 to 1/29/13 with heated seats that become inoperative at cold temperatures below 10 degrees.~ Dealers should NOT replace the Heated Seat Module 68138715AA. Dealers should order a new driver and passenger heated seat back pad to correct this issue when the WiTech indicates Diagnostic Trouble Code (DTC) B1092 or B1096. ~ Both driver and passenger HEATED SEAT BACK PAD parts should be replaced even if only one seat exhibits the issue.~ The repair entails removing the seat back trim cover, cutting off the pigtail of the original element and placing the replacement element part over the original part and making the electrical connection |
| 23-029-14 | 2018-06-11. Service bulletin. Front Passenger Seat High Effort To Adjust Fore/Aft This bulletin involves applying MOPAR grease to the contact points between the inner and outer seat tracks to reduce adjustment effort. High effort to adjust the front passenger seat in the fore/aft direction. |
| 23-029-17 | 2018-06-04. Service bulletin. Dimpled Driver Side Front Leather Heated Seat This bulletin involves inspecting and installing heater element patches and replacing seat cushion cover, on the driver?s front seat.The customer may describe, the driver?s front leather seat has dimples in the seat bottom. The dimples are caused by openings in the heated seat element, seeFig. 1.Dimple Location On Leather Seats1 - Dimples |
| 23-028-17 | 2018-06-04. Service bulletin. Squeaking Noise Below The Front Seat While Turning and Going Over Bumps This bulletin involves replacing the bolt and bushing on driver and passenger side seat slide mechanism to resolve a squeaking issue (Two door models only). The customer may describe a squeak heard under the front passenger or driver side seat, while turning or driving over bumps. |
| 9002829 | 2018-05-21. Service bulletin. Part Description: Element Assy - Heated Seat Front Lt and Rt Issue Description: 2013 JK(Wrangler) vehicles built from 2013 Start Of Production 7/23/12 to 1/29/13 with heated seats that become inoperative at cold temperatures below 10 degrees.~ Dealers should NOT replace the Heated Seat Module 68138715AA. Dealers should order a new driver and passenger heated seat back pad to correct this issue when the WiTech indicates Diagnostic Trouble Code (DTC) B1092 or B1096. ~ Both driver and passenger HEATED SEAT BACK PAD parts should be replaced even if only one seat exhibits the issue.~ The repair entails removing the seat back trim cover, cutting off the pigtail of the original element and placing the replacement element part over the original part and making the electrical connection |