Service bulletin PIP5817A
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10208058 |
| Published by NHTSA | 2022-02-14 |
| Manufacturer's number | PIP5817A |
| Manufacturer's date | 2022-01-26 |
| NHTSA component | BACK OVER PREVENTION |
NHTSA's summary
This Preliminary information communicates to the dealers information related to a hot idle tick noise from the engine. Testing to isolate the noise to the upper engine / valve train and repair recommendations related to valve train components.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Driver assistance, Backup camera
| BUICK ENVISION | 2021, 2022 |
|---|---|
| CADILLAC CT4 | 2020, 2021, 2022 |
| CADILLAC CT5 | 2020, 2021, 2022 |
| CADILLAC XT4 | 2019, 2020, 2021, 2022 |
| CADILLAC XT5 | 2020, 2021, 2022 |
| CADILLAC XT6 | 2020, 2021, 2022 |
| CHEVROLET BLAZER | 2020, 2021, 2022 |
| CHEVROLET SILVERADO 1500 | 2021, 2022 (the catalog's model; the bulletin names a series or trim of it) |
| GMC ACADIA | 2020, 2021, 2022 |
| GMC SIERRA 1500 | 2021, 2022 (the catalog's model; the bulletin names a series or trim of it) |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 22V868000 | 2022-11-23. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA |
|---|---|
| 22V709000 | 2022-09-22. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| 22-NA-068 | 2025-02-28. Service bulletin. This technical bulletin provides repair information to correct a customer concern of Diagnostic Tips For Park Assist Off Message / Unwanted Or False Park Assist Alerts / No DTCs. |
|---|---|
| PIT5907D | 2024-12-16. Service bulletin. This Preliminary information communicates a issue where the park assist module can set current communication dtc's due to a timing issue and it may have nothing related to the customers complaint. A software update will be available to repair these false DTC's |
| PIT5697D | 2024-12-09. Service bulletin. This Preliminary information communication provides information to the technician on installing Regular Production Option Code UVC Rearview Camera. Technician will need to reference the latest version of General Motors Up-fitter Integration Bulletin 152. The information can be found at http://www.gmupfitter.com/ under the "Technical Bulletin" Tab and then "Show all bulletins." |
| PIT6289 | 2024-12-04. Service bulletin. This Preliminary information communicates information that Engineering is aware of a concern where the collision / detection alert changes from audible beep to haptic feedback on its own and are working on a repair. |
| 23-NA-084 | 2024-08-15. Service bulletin. This service bulletin provides repair information to correct a customer concern of a Blue Hourglass and No Gridlines on Radio Rear View Camera Display While in Reverse. |
| 23-NA-169 | 2024-03-06. Service bulletin. This service bulletin provides repair information to correct a customer concern of the rearview driver information camera intermittent in low light conditions - replace camera. |
| PIT5386J | 2024-01-29. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that are found to have a back-up alarm inoperative during the Pre-Delivery Inspection. On trucks equipped with the Back Up Alarm (RPO 8S3), the alarm will be intentionally left disconnected from the assembly plant. Technician will reroute the harness and plug it in. |
| PIP5847B | 2023-12-18. Service bulletin. This Preliminary information communicates the possibility of a misfire or rough running concern and abnormal engine noise due to excessive wear in exhaust roller follower axle pin. |
| PIT5931C | 2023-12-04. Service bulletin. This Preliminary information communicates that a vehicle may be encountered with a clunk or rattle from the front of the vehicle. The dealer technician is instructed to remove the cradle brace and see if the noise is gone. If the noise is gone with the brace removed the tech is instructed to reinstall the brace and torque it to specification. |
| PIT5931B | 2023-12-04. Service bulletin. This Preliminary information communicates that a vehicle may be encountered with a clunk or rattle from the front of the vehicle. The dealer technician is instructed to remove the cradle brace and see if the noise is gone. If the noise is gone with the brace removed the tech is instructed to reinstall the brace and torque it to specification. |