Service bulletin MC340320
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10200261 |
| Published by NHTSA | 2021-08-09 |
| Manufacturer's number | MC340320 |
| Manufacturer's date | 2021-06-14 |
| NHTSA component | SERVICE BRAKES, HYDRAULIC |
NHTSA's summary
During assembly, an additional mounting bolt was installed on the ABS pressure modulator instead of a plastic rivet.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Brakes
| BMW S 1000 XR | 2020 |
|---|---|
| BMW S1000 XR | 2015 |
| BMW S1000 XR | 2016, 2017, 2018, 2019 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 2020570 | 2020-11-24. Brakes |
|---|---|
| 2020377 | 2020-08-14. Brakes |
| 20V476000 | 2020-08-13. SERVICE BRAKES; SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| MC340320 | 2020-11-16. Service bulletin. SERVICE ACTION - ABS MODULATOR MOUNTING BOLT: During assembly, an additional mounting bolt was installed on the ABS pressure modulator instead of a plastic rivet. This changes the vibration behavior of the ABS modulator. When the motorcycle is frequently used at very high engine speeds, vibration damage to the components could occur. |
|---|---|
| MC61479140 | 2018-12-10. Service bulletin. When the brake system is filled with fluid for the first time in the assembly plant, a float is installed in the fluid reservoir of the handbrake fitting (see Figures 1 and 2). This float is required only for the initial, vacuum-assisted filling of the sy |
| MC3200115 | 2018-12-10. Service bulletin. When the brake system is filled with fluid for the first time in the assembly plant, a float is installed in the fluid reservoir of the handbrake fitting (see Figures 1 and 2). This float is required only for the initial, vacuum-assisted filling of the system. As long as the float remains in the reservoir it is subsequently not possible to obtain a clear reading of the brake-fluid level. In order to make it easier for the fluid level to be read correctly, the float has to be removed. |
| MC3200115 | 2018-11-13. Service bulletin. When the brake system is filled with fluid for the first time in the assembly plant, a float is installed in the fluid reservoir of the handbrake fitting (see Figures 1 and 2). This float is required only for the initial, vacuum-assisted filling of the system. As long as the float remains in the reservoir it is subsequently not possible to obtain a clear reading of the brake-fluid level. In order to make it easier for the fluid level to be read correctly, the float has to be removed. |
| MC6204735401 | 2018-11-05. Service bulletin. Implausible RPM values displayed, speed indicator shows "---", DDC and or ABS lamp lights up. Loose threaded connector. |