Service bulletin VS3BREBOL Instal
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10199434 |
| Published by NHTSA | 2021-07-26 |
| Manufacturer's number | VS3BREBOL Instal |
| Manufacturer's date | 2021-03-03 |
| NHTSA component | EQUIPMENT; SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES; EQUIPMENT ADAPTIVE/MOBILITY |
NHTSA's summary
Install Additional Retaining Clip on Brake Pedal
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Brakes, Equipment and accessories
| MERCEDES-BENZ SPRINTER (VS30) | 2019, 2020 (the catalog's model; the bulletin names a series or trim of it) |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 21V854000 | 2021-11-03. SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC |
|---|---|
| 21V237000 | 2021-04-05. EQUIPMENT:OTHER:LABELS |
| 2021149 | 2021-03-15. Brakes |
| 21V152000 | 2021-03-10. SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES |
| 2020641 | 2020-12-22. Brakes |
| 20V802000 | 2020-12-21. SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER |
| 20V756000 | 2020-12-08. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL |
| 2020491 | 2020-10-19. Brakes |
| 20V631000 | 2020-10-14. SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS |
| 2020134 | 2020-03-31. Brakes |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| LI54_71_N_080985_1 | 2026-10-06. Service bulletin. Brakes may lock up when reversing at slow speeds Complaint When reversing slowly, the vehicle erroneously triggers an emergency braking event, causing the brakes to lock up. Engine may not start following a key cycle. Cause The vehicle triggers a maneuvering or emergency braking event while reversing. The customer must then immediately park the vehicle (ignition Switched OFF) The hydraulic pressure release process within the ESP control unit may not be completed. Remedy Updating the software release of the RVC177 reversing camera |
|---|---|
| News Channel upd | 2024-03-25. Service bulletin. News channel update. |
| News Channel upd | 2024-03-25. Service bulletin. News channel update. |
| 2023120018 | 2024-03-04. Service bulletin. Recall Information. |
| 2023120017B | 2024-03-04. Service bulletin. Recall Information. |
| Parts and Servic | 2022-08-08. Service bulletin. (SC)Check and Install Aux Battery Bracket and Information Label |
| Service Informat | 2022-08-08. Service bulletin. (SC)Provide Supplementary Operator's Manual |
| TIF-021 | 2022-08-02. Service bulletin. Mercedes-Benz has initiated a Recall Campaign for Model Year 2020 Sprinter vehicles to update the Engine Control Unit (ECU) software and Transmission Control Unit (TCU) software in these vehicles. To ensure your vehicle is in compliance with emissions regulations and is covered by the full protection of the emission warranty provisions, it is recommended that you have your vehicle serviced as soon as possible. Failure to do so could be deemed a lack of proper maintenance on your vehicle. This Recall Campaign does not cover any other components, and standard warranty terms and exclusions apply to those components. |
| CSA-020 | 2022-08-02. Service bulletin. Mercedes-Benz AG (“MBAG”), the manufacturer of Mercedes-Benz vehicles, has determined that on certain Sprinter vehicles, the Engine Control Unit (ECU) software, Transmission Control Unit (TCU) software and Dosing Control Unit (DCU) software does not correspond to current series production specifications. An authorized Mercedes-Benz Sprinter dealer will update the Engine Control Unit (ECU) software, Transmission Control Unit (TCU) software and Dosing Control Unit (DCU) software. |
| LI01.00-N-074210 | 2022-02-04. Service bulletin. Complaint Oil loss from engine or visible traces of oil in the engine compartment. Cause To be determined in each possible situation Remedy Procedure for cause analysis: 1. Clean the engine if necessary. 2. Apply leak tracing powder. 3. Perform a test drive. 4. Locate the oil leak. 5. Perform the repair in accordance with the specific WIS document appropriate for the cause of the oil leak. |