Service bulletin SMT-TN-148
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10192910 |
| Published by NHTSA | 2021-05-10 |
| Manufacturer's number | SMT-TN-148 |
| Manufacturer's date | 2013-08-01 |
| NHTSA component | ENGINE AND ENGINE COOLING |
NHTSA's summary
Triumph has begun to receive an increase in warranty claims for exhaust butterfly cables and motor assemblies fitted to the above models. During inspection, it has been recognised that the components are serviceable and no faults have been found. Therefore we seek to remind dealers to refer to Technical News 142 dated March 2013 (Item 12) and follow the revised adjustment procedure prior to replacing any components.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Engine
| TRIUMPH DAYTONA 675 | 2006, 2007, 2008, 2009 |
|---|---|
| TRIUMPH DAYTONA 675 | 2011, 2012, 2013, 2014 |
| TRIUMPH DAYTONA 675 ABS B1 | 2016 (the catalog's model; the bulletin names a series or trim of it) |
| TRIUMPH DAYTONA 675 R | 2014 |
| TRIUMPH DAYTONA 675 R ABS B1 | 2015 (the catalog's model; the bulletin names a series or trim of it) |
| TRIUMPH DAYTONA 675 R ABS B1 | 2017 (the catalog's model; the bulletin names a series or trim of it) |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| SMT-COM01 | 2022-09-26. Service bulletin. Dealer notice reminding of the new California Prop 65 regulation. |
|---|---|
| SMT-TN-163 | 2021-05-10. Service bulletin. Mudgaurd alignment, sump, crankcase breather bolts, sump plug sealing washer, seat lock, drivebelt tension, reflector mounting o-rings, water inlet cover bolt and water outlet cover bolt, bleeding the brakes, and front inner wheel, inner tube and valve. |
| SMT-SB-485 | 2021-05-10. Service bulletin. We have identified that the two bolts securing the coolant hose T-piece to the lower crankcase are not tightened to specification. Dealers are requested to re-torque the bolts as instructed below. |
| SMT-SB-484 | 2021-05-10. Service bulletin. We have identified a need to replace the exhaust butterfly valve cables on the above models. Dealers are requested to remove and replace the exhaust butterfly valve cables. |
| SMT-TB201-20DEC2 | 2020-01-21. Service bulletin. Technical Bulletin 200 provides instructions that apply to Steering Lock and Keys, Neutral Position Adaption, Triumph Diagnostic Tool - End of Support for Microsoft Windows 7®, Triumph Diagnostic Tool - Internet Connection and Minimum eEquipment Requirement, Torque Change, Clutch Cable, Camshaft Frame Installation, Immobiliser Antenna Wire Routing. |
| SMT-TN 159 1 Oct | 2017-11-03. Service bulletin. Technical service bulletin 159 addressing 19 service instructions, some of which apply to all models. Instructions relate to piston and piston top ring, alternator rotor retaining bolt, rear brake hose guide, auxiliary lights, headlight spares, gear selector drum and neutral light switch, pulser ring fixings, side stand fixing, battery terminal cover, heated grip fixings, headstock bearing adjustment, front and rear diretion indicator fixings, swinging arm, throttle linkage cleaning, headlight label, clutch lifter piece, rear brake caliper bleed nipple and owner's handbook. |
| SMT-TN 157 1 May | 2017-11-03. Service bulletin. Technical service bulletin 157 addressing 10 service instructions. Instructions relate to fork oil level, service manual amendment, torque change, seat infill panel locating lug fixings, harness, gear position sensor and harness/gear position sensor parts kit, torque change, M10 ABS hard line unions, front fork disassembly and assembly, new packing crate and footboard reassembly, main frame parts kit, torque change, clutch cover fixings, ABS front brake line. |
| TB-104 | 2009-12-03. Service bulletin. TRIUMPH MOTORCYCLE: HEADERS DISCOLOURATION, CAMSHAFT COVER, HORN, BRAKE CALIPER SLIDING PIN GREASING, CAMSHAFT CAP LADDER BOLTS TIGHTENING SEQUENCE, OIL PRESSURE RELIEF VALVE, NEW COOLANT, WARNING LABELS, ENGINE CONTROL MODULE (ECM) BRACKET, FORK SHROUDS, AND DRIVER CHAIN FREE MOVEMENT. DEALERS TO CHECK MOTORCYCLES PRIOR TO BEING DELIVERED TO CUSTOMERS. NO MODEL YEARS LISTED. *PE |
| TSB-108 | 2009-07-16. Service bulletin. TRIUMPH MOTORCYCLES: MODELS DAYTONA 675, ROCKET III, ROCKET II CLASSIC, ROCKET III TOURING, SPEED TRIPLE 1050, SPRINT 1050, SPRINT 1050 ABS, TIGER 1050, TIGER 1050 ABS, STREET TRIPLE, STREET TRIPLE R AND DAYTONA 955 FROM 2002. *PE |