Service bulletin T-SB-0035-16 Rev

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
Type	Service bulletin
NHTSA id	10179599
Published by NHTSA	2020-09-14
Manufacturer's number	T-SB-0035-16 Rev
Manufacturer's date	2020-08-05
NHTSA component	ELECTRICAL SYSTEM

NHTSA's summary

TSB: Some 2014 model year Toyota vehicles equipped with Entune? Audio (version 010169), Entune? Audio Plus (version 010171), or Entune? Premium Audio (version 010185) may exhibit one or more of the following conditions: ?Bluetooth® sometimes disconnects with Android? phones. ?Bluetooth® disconnects with iPhone® 4 when connected to USB. ?Radio reboots with heavy radio load condition (e.g., dual map and POIs ON and Entune? Audio music ON and multiple destinations set) (Entune? Premium Audio only). ?Radio reboots after completing a navigation route by voice command system and pressing Talk Switch (Entune? Premium Audio only). Some 2014 model year Toyota vehicles equipped with Entune? Audio (version 010173), Entune? Audio Plus (version 01017C), or Entune? Premium Audio (version 010195) may exhibit one or more of the following conditions: ?Voice command screen is cancelled by a pop-up screen. ?Voice command system does not respond for an extended period of time. ?Radio reboots and navigation route is deleted (Entune? Premium Audio only). ?Bluetooth® disconnects when phone is connected to Bluetooth® Audio from USB connection. ?Radio reboots after entering a particular address as destination (Entune? Premium Audio only). ?Route guidance is lost after ACC is cycled and after arriving at a second destination (Entune? Premium Audio only).

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system

Vehicles listed
TOYOTA 4RUNNER	2014, 2015
TOYOTA AVALON	2015
TOYOTA AVALON HYBRID	2015 (the catalog's model; the bulletin names a series or trim of it)
TOYOTA HIGHLANDER	2014, 2015
TOYOTA HIGHLANDER HYBRID	2014, 2015 (the catalog's model; the bulletin names a series or trim of it)
TOYOTA MIRAI	2016, 2017
TOYOTA PRIUS V	2015
TOYOTA SEQUOIA	2014, 2015
TOYOTA SIENNA	2015
TOYOTA TACOMA	2014, 2015
TOYOTA TUNDRA	2014, 2015
TOYOTA VENZA	2015

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
2021723	2021-11-24. Electrical
2020284	2020-06-25. Electrical
14V272000	2014-05-22. ELECTRICAL SYSTEM:SOFTWARE; SEAT BELTS

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
T-SB-0058-23 Rev1	2025-07-10. Service campaign. The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. The procedures outlined in this Service Bulletin aid in locating, inspecting, and repairing refrigerant leaks.
K0P_TISdownload_	2023-11-27. Service bulletin. TI: TECHNICAL INSTRUCTIONS FOR LIMITED SERVICE CAMPAIGN K0P CUSTOMER SUPPORT PROGRAM 19TE12 SAFETY CONNECT SYSTEM ? VEHICLE LOCATION INACCURATE CERTAIN 2013 ? 2019 MODEL YEAR 4RUNNER 2011 ? 2017 MODEL YEAR LAND CRUISER 2013 ? 2017 MODEL YEAR PRIUS 2012 ? 2017 MODEL YEAR PRIUS V 2016 ? 2017 MODEL YEAR MIRAI Updated 010/25/2023
K0P_TISdownload_	2023-11-27. Service bulletin. DP: The Data Communication Module (DCM) in the subject vehicles are equipped with software to identify the location of the vehicle using the Global Positioning System (GPS) to support features of the Safety Connect system. Due to incorrect programming in the DCM software, after November 2nd, 2019, the GPS coordinates for this system will be calculated incorrectly. This will cause the system to use incorrect vehicle coordinates if one of the system?s features is activated.
23TE03	2023-07-31. Service bulletin. DP: The Customer Confidence Program is a component of a class action settlement that includes several elements of coverage. The Customer Confidence Program provides coverage as it applies to the Intelligent Power Module (IPM). The specific condition covered by this Customer Confidence Program 23TE03 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A94, P0A1A, P324E, and/or P3004. If any of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode.
23TE02	2023-07-31. Service bulletin. DP: The Customer Confidence Program is a component of a class action settlement that includes several elements of coverage. The Customer Confidence Program provides coverage as it applies to the intelligent power module (IPM). The specific condition covered by this Customer Confidence Program 23TE02 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A7A and/or P0A78. If either of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode. Toyota will also provide coverage if the IPM has failed due to a thermal event regardless of what DTC is detected, or if the IPM has failed and the failure cannot be demonstrated to be due to anything other than a thermal event.
T-SB-0057-18	2023-06-26. Service bulletin. TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
23TE03	2023-05-01. Service bulletin. DP: The Customer Confidence Program is a component of a class action settlement that includes several elements of coverage. The Customer Confidence Program provides coverage as it applies to the Intelligent Power Module (IPM). The specific condition covered by this Customer Confidence Program 23TE03 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A94, P0A1A, P324E, and/or P3004. If any of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode.
23TE02-1	2023-05-01. Service bulletin. DP: The Customer Confidence Program is a component of a class action settlement that includes several elements of coverage. The Customer Confidence Program provides coverage as it applies to the intelligent power module (IPM). The specific condition covered by this Customer Confidence Program 23TE02 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A7A and/or P0A78. If either of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode. Toyota will also provide coverage if the IPM has failed due to a thermal event regardless of what DTC is detected, or if the IPM has failed and the failure cannot be demonstrated to be due to anything other than a thermal event.
TSB000321	2023-05-01. Service bulletin. TSB: Some 2010 ? 2015 model year Prius and 2012 ? 2017 model year Prius V vehicles may exhibit a MIL ON condition with Diagnostic Trouble Codes (DTCs) P0A94, P324E, P0A1A, and/or P3004, indicating a malfunction has occurred in the inverter assembly with converter. Follow the Repair Procedure in this bulletin to identify the specific components within the inverter assembly with converter that need to be replaced and address this condition.
TSB001123	2023-05-01. Service bulletin. TSB: Some 2010 ? 2015 model year Prius and 2012 ? 2017 model year Prius V vehicles may exhibit a MIL ON condition with Diagnostic Trouble Codes (DTCs) P0A7A and/or P0A78, indicating a malfunction has occurred in the inverter assembly with converter. Follow the Repair Procedure in this bulletin to identify the specific components within the inverter assembly with converter that need to be replaced and address this condition.