Service bulletin S1723000007
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10176517 |
| Published by NHTSA | 2020-06-22 |
| Manufacturer's number | S1723000007 |
| Manufacturer's date | 2020-05-04 |
| NHTSA component | SUSPENSION |
NHTSA's summary
Air Suspension Inoperative And Or Compressor Freeze Up Or Sticking In Cold Weather.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Suspension
| JEEP GRAND CHEROKEE | 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 |
|---|---|
| RAM 1500 | 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 15V469000 | 2015-07-27. SUSPENSION:REAR |
|---|---|
| 2015331 | 2015-07-22. Suspension |
| 2014276 | 2014-07-03. Suspension |
| 14V392000 | 2014-07-02. SUSPENSION:REAR:SHOCK ABSORBER |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| 9100897Rev1 | 2026-09-17. Service bulletin. Qudra Lift Reman Compressor Excessive Repairs on Quadra Lift Reman Compressors Part Numbers: 68041137AF / R8572790AA / 68087233AA / 52124932AE / 52124934AE / 68064343AC Purpose The Star Parts Catalog has been updated to support component-level repair of the Quadra-Lift air suspension system. Replace only the component confirmed failed through diagnostics. Avoid replacing the complete assembly when an individual service component can correct the concern. Available Service Components Part Number Description R8572790AA Air Suspension Compressor 68087233AA Air Suspension Valve Block 52124932AE Front Air Suspension Hose Assembly 52124934AE Rear Air Suspension Hose Assembly 68064343AC Air Suspension Reservoir 68087240AA Temperature Sensor 68041137AF Compressor Assembly Diagnostic Decision Tree Customer Complaint: Service Air Suspension Message / Sagging / Unable to Adjust Ride Height / Compressor Running Continuously. Step 1: Retrieve and record all DTCs. C15D9 (Low Air Mass): Perform air mass test, complete system fill, leak-down test, and leak source identification before compressor replacement. C15A1 (Unable to Obtain Desired Ride Height): Verify ride height, perform leak-down test, inspect valve block, air lines, and air springs. C1562-98 (Over Temperature): Inspect for excessive compressor run time, leaks, low air mass, and restrictions before condemning the compressor. If a leak is found, repair the leak and verify operation before replacing the compressor. If no leak is found, perform compressor functional evaluation. If moisture is in the lines and valve block, then evacuate or replace lines. Only replace the compressor when a defect is verified (internal leak, failed solenoid, weak output, seized motor, failed functional test, or electrical failure). Service Component Selection Guide Verified Root Cause Recommended Repair Compressor Internal Failure Replace Compressor Valve Block Failure Replace Valve Block Air Line Leak Replace Air Line Air Spring Leak Replace Air Spring Temperature Sensor Failure Replace Temperature Sensor Technician Reminder Replace only the component confirmed failed through diagnostics. In many cases, compressor replacement is not required when the root cause is an air leak, valve block issue, airline concern, or sensor fault. |
|---|---|
| 9100897 | 2026-09-10. Service bulletin. Qudra Lift Reman Compressor Excessive Repairs on Quadra Lift Reman Compressors Part Numbers: 68041137AF / R8572790AA / 68087233AA / 52124932AE / 52124934AE / 68064343AC Purpose The Star Parts Catalog has been updated to support component-level repair of the Quadra-Lift air suspension system. Replace only the component confirmed failed through diagnostics. Avoid replacing the complete assembly when an individual service component can correct the concern. Available Service Components Part Number Description R8572790AA Air Suspension Compressor 68087233AA Air Suspension Valve Block 52124932AE Front Air Suspension Hose Assembly 52124934AE Rear Air Suspension Hose Assembly 68064343AC Air Suspension Temperature Sensor 68041137AF Service Components Reference Diagnostic Decision Tree Customer Complaint: Service Air Suspension Message / Sagging / Unable to Adjust Ride Height / Compressor Running Continuously. Step 1: Retrieve and record all DTCs. C15D9 (Low Air Mass): Perform air mass test, complete system fill, leak-down test, and leak source identification before compressor replacement. C15A1 (Unable to Obtain Desired Ride Height): Verify ride height, perform leak-down test, inspect valve block, air lines, and air springs. C1562-98 (Over Temperature): Inspect for excessive compressor run time, leaks, low air mass, and restrictions before condemning the compressor. If a leak is found, repair the leak and verify operation before replacing the compressor. If no leak is found, perform compressor functional evaluation. If moisture is in the lines and valve block, then evacuate or replace lines. Only replace the compressor when a defect is verified (internal leak, failed solenoid, weak output, seized motor, failed functional test, or electrical failure). Service Component Selection Guide Verified Root Cause Recommended Repair Compressor Internal Failure Replace Compressor Valve Block Failure Replace Valve Block Air Line Leak Replace Air Line Air Spring Leak Replace Air Spring Temperature Sensor Failure Replace Temperature Sensor Technician Reminder Replace only the component confirmed failed through diagnostics. In many cases, compressor replacement is not required when the root cause is an air leak, valve block issue, airline concern, or sensor fault. |
| 112651 | 2026-06-18. Service bulletin. SHOCK ABSORBER - SUSPENSION |
| 112652 | 2026-06-18. Service bulletin. SHOCK ABSORBER - SUSPENSION |
| S2502000001 | 2025-12-11. Service bulletin. Lower Ball Joint / Lower Control Arm Servicing Updates. |
| 02-002-25 REV. A | 2025-09-17. Service bulletin. Shock And Strut Diagnosis And Replacement Guidelines Leaking, noisy, or weak shocks or struts. |
| 106352 | 2025-09-10. Service bulletin. SHOCK ABSORBER – SUSPENSION & SHOCKS - REAR |
| 02-002-25 | 2025-05-30. Service bulletin. "Shock And Strut Diagnosis And Replacement Guidelines Leaking, noisy, or weak shocks or struts. " |
| 02-001-25 | 2025-03-03. Service bulletin. "Front Lower Control Arm Stabilizer Link Noise Customers may experience the following: ● Rattle or clunk noise coming from the front end of the vehicle when driving over bumps, performing turns or during normal operation. This bulletin involves road testing and possibly tightening the stabilizer link attachment to lower control arm nut. " |
| 9100460 REV1 | 2025-01-21. Service bulletin. ARM Lower Control WHAT: Clunking noise from Front Stabar link to Front Lower Control Arm (FLCA). WHY: The joint is coming loose due to loss of clamp load when there is embedment on FLCA mating surface to the stabar link ball stud. We are currently updating the stabar link design and new design will be implemented in March 2025. HOW: If this Front stabar link to FLCA joint torque is under the residual torque of 70Nm, please retorque the joint to this spec of 110 (Min 70-Max 138). Otherwise proceed with regular diagnosis. |