WenmarOpen by Wenmar Pro

Service bulletin S2005000002

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10173307
Published by NHTSA2020-04-06
Manufacturer's numberS2005000002
Manufacturer's date2020-02-07
NHTSA componentSERVICE BRAKES

NHTSA's summary

Pad Contact On Rotor After Brake Service

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Brakes

Vehicles listed
CHRYSLER 3002018, 2019, 2020
DODGE CHALLENGER2018, 2019, 2020
DODGE CHARGER2018, 2019, 2020

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
19V7580002019-10-24. SERVICE BRAKES; WHEELS; TIRES

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
1084632025-11-26. Service bulletin. PAD KIT - REAR DISC BRAKE, FRONT DISC BRAKE
1084642025-11-26. Service bulletin. PAD KIT - REAR DISC BRAKE, FRONT DISC BRAKE
S18080001522024-01-02. Service bulletin. CEL (Check Engine Lamp) Illuminates, Recent PCM Replace or Flash Update Performed, Diagnostic Trouble Codes (DTCs) P057B Brake Pedal Position Sensor Circuit Performance, P1572 Brake Pedal Stuck, C0042-54 Brake Pedal Missing Calibration
S21080001702023-01-17. Service bulletin. Head unit button stuck DTC code B14DA-2A
18065222023-01-09. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or moreof the following DTCs have been set: P0452 - EVAP Pressure Switch Stuck Closed. P0455 - EVAP System Large Leak. P0440 - General EVAP System Failure. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification Test (SLVT)to determine if a leak is present in the system. Customers may also experience one or more of the following: Vehicle will fail to start when cold at times. A noise heard from the drivetrain while stationary and vehicle is inSport/Track modes. Extended engine crank times.
18064222023-01-09. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or moreof the following DTCs have been set: P0452 - EVAP Pressure Switch Stuck Closed. P0455 - EVAP System Large Leak. P0440 - General EVAP System Failure. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT) to determine if a leak is present in the system. Customers may also experience the following:Vehicle willfail to start when cold at times. Noise heard from the drivetrain while stationary and vehicle is in Sport/Trackmodes. Extended engine crank times.
18066222023-01-09. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or moreof the following DTCs have been set: P0452 - EVAP Pressure Switch Stuck Closed. P0455 - EVAP System Large Leak. P0440 - General EVAP System Failure. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT) to determine if a leak is present in the system. Customers may also experience one or more of the following: Vehicle will fail to start when cold at times. Noise heard from the drivetrain while stationary and vehicle is in Sport/Trackmodes. Extended engine crank times.
S2208000138RevA2022-12-12. Service bulletin. Decreased Remote Start And RKE Range. Tire Pressure Sensors Values Are Not Displayed
90037562022-10-24. Service bulletin. Rain light sensor Rain sense wipers do not operate: 1. Visual Inspection--> Check if the sensor is visually OK. (all the pins are OK) Check that the Connector is NOT loose (Sensor must get a voltage from 9V to 16V) 2. Functional Checks Rain--> Steering column switch is in auto mode (sensor is active) it is necessary to splash water on the sensitive surface of the sensor to trigger wipes. check the same for different sensitivities When the rain sensitivity is increased (for example from level 0 to level 1), as an acknowledgement a single wipe is seen. (This is not a phantom wipe) and this single wipe is not seen when the rain sensitivity is decreased (from higher level to lower level) Light--> Steering column switch is in auto mode (sensor is active) block the light coming on the sensor from outside of the vehicle (use a opaque object), the head lamps should be activated 3. If the sensor seems functional, it is ideal to remove the silicon gel pad from the sensor, replace it with the new silicon gel pad instead of replacing the whole sensor. When servicing the LRSM please replace the silicon gel pad with a new silicon gel pad (PN 68224945AA) instead of replacing the whole sensor.
25003202022-10-17. Service bulletin. Evaporative Emission Control System (EVAP) Purge Line Kinked This bulletin involves inspecting and possibly replacing the EVAP purge valve assembly. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or moreof the following Diagnostic Trouble Codes (DTCs) has been set:P0441 - EVAP Purge System Performance. P0452 - EVAP Pressure Switch Stuck Closed.