WenmarOpen by Wenmar Pro

Service bulletin TSB-13-13-001

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10170846
Published by NHTSA2020-02-11
Manufacturer's numberTSB-13-13-001
Manufacturer's date2013-01-29
NHTSA componentPOWER TRAIN; ENGINE AND ENGINE COOLING

NHTSA's summary

During cold engine start, rough or partial clutch operation may cause powertrain vibration similar to misfire conditions and cause false MIL illumination. New software revises improper Misfire Monitoring (P0300) threshold values to prevent these problems. This TSB provides a field fix procedure to address false MIL illumination with DTC P0300 (Random/multiple cylinder misfire detected) stored in the ECM.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Engine, Transmission and driveline

Trouble codes named

P0300

Vehicles listed
MITSUBISHI LANCER2011
MITSUBISHI LANCER SPORTBACK2011
MITSUBISHI OUTLANDER SPORT2011

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
18V0690002018-01-26. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:BELTS AND ASSOCIATED PULLEYS
20143972014-09-15. Engine
14V5620002014-09-12. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:BELTS AND ASSOCIATED PULLEYS

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
TSB-24-23-0042024-07-05. Service bulletin. Service Manual Revision - This Technical Service Bulletin provides corrections to the description of special tools used to install the oil seal within the Automatic Transaxle sections of the applicable Service Manuals.
TSB-23-22-0012023-08-04. Service bulletin. This Technical Service Bulletin provides service manual corrections and additional information for the transaxle assembly removal and installation of the roll stopper bracket.
TSB-11-66-001REV2023-04-07. Service bulletin. This Technical Service Bulletin contains technical information and troubleshooting for the accessory Remote Engine Start system for affected vehicles.
TIN-23-66-0012023-04-07. Service bulletin. This is a Technical Information Notice informing dealers and parts managers about possible causes after a customer complains that the engine will not start while using the remote start system.
TSB-23-11-0012023-02-07. Service bulletin. This TSB provides revisions to the Removal and Installation procedures for the rocker cover due to changes in the quantity of mounting bolts for vehicles equipped with 4B1 series engine. (Service Manual Revision)
TIN-21-13-0012021-05-08. Service bulletin. This Technical Information Notice provides additional instructions to dealers when replacing the Valve Cover Gasket due to a customer concern of oil leaking.
TIN-20-SR-0032020-09-14. Service bulletin. This Technical Information Notice was sent to dealers informing that a recall campaign was released on July 22, 2020 (SR-20-003) for the Crossmember Corrosion.
ATIN-20-SR-003-B2020-07-20. Service bulletin. This Advanced Technical Information Notice was sent to dealers informing them of the upcoming recall being released for the inside and outside surfaces of the front cross members used on certain vehicles, if exposed long term to snow melt water and anti-freezing agents, may corrode due to insufficient performance of the rust protection.
TSB-13-22-0032020-03-18. Service bulletin. The Mechatronic assembly (valve body and TCM) and the clutch assembly are now available as service parts. This TSB provides instructions for transmission overhaul that were not included in the service manual.
TSB-13-22-0022020-03-18. Service bulletin. Procedures are now available for W6DGA TC-SST clutch assembly replacement. This TSB provides the necessary steps to complete diagnosis, clutch assembly replacement, and complete "Teach-in" procedures for the TCM. This TSB is used together with the Service Manual, TSB-16-22-003: "TC-SST Transmission and Mechatronic Assembly Diagnosis and Repair," and TSB-13-22-003: "TC-SST Diagnosis and Overhaul - Service Manual Revision," to provide procedures for the complete and accurate diagnosis and repair of the TC-SST transmission.