Service bulletin 2041887/2
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10169969 |
| Published by NHTSA | 2020-01-17 |
| Manufacturer's number | 2041887/2 |
| Manufacturer's date | 2016-02-04 |
| NHTSA component | STRUCTURE |
NHTSA's summary
Under bonnet trim - engine cover (SC16/01) Technical background: A number of under bonnet trim parts, engine covers, may have been assembled using incorrect material. The suspect material is mild steel mesh and may be prone to oxidation Remedy: Check grill for correct material and replace engine cover assembly if necessary
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Body and frame
| BENTLEY MULSANNE | 2011, 2012, 2013, 2014, 2015, 2016 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 2057841/5 | 2026-09-09. Service bulletin. Windscreen replacement criteria whilst under manufacturers warranty. |
|---|---|
| 2075786/3 | 2026-07-29. Service bulletin. Airbag, fire, accident (safety-related enquiry - reporting forms) There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year. |
| 2057841/4 | 2026-05-07. Service bulletin. Windscreen replacement criteria whilst under manufacturers warranty. Customer statement / workshop findings: Windscreen cracked/damaged |
| 2075786/2 | 2025-10-30. Service bulletin. Airbag, fire, accident (safety-related enquiry - reporting forms). There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year. |
| 2069806/7 | 2025-10-07. Service bulletin. HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin - Diagnosis guidelines |
| 2075786/1 | 2025-06-06. Service bulletin. Airbag, fire, accident (safety-related enquiry - reporting forms). There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year. |
| 2056407/6 | 2025-03-08. Service bulletin. Running gear - Noise identification. Customer statement: Noise complaint from the suspension and/or steering. |
| 2069806/4 | 2023-10-06. Service bulletin. HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin - Diagnosis guidelines. Condition HVAC not cooling / HVAC cooling less than expected / HVAC refrigerant leakage confirmed Or The customer reports a damp/musty smell within the cabin. - Should no HVAC leak be evident and a damp/musty smell has been reported/identified the operative should first confirm that water is not leaking into the cabin please refer to all VIN applicable TPIs particularly TPI 2062622/- - Should there be no water leaks evident, the operative should check the HVAC and body drains for blockages, in the event the drains are blocked the drains must be unblocked, once this has been completed the operative should confirm if the damp/musty smell is still evident. |
| 2057841/3 | 2021-10-06. Service bulletin. Windscreen replacement criteria whilst under manufacturers warranty Customer statement / workshop findings: Windscreen cracked/damaged Technical background: Please refer to the instructions within the Measure section of this TPI in the event that a windscreen is cracked/damaged NOTE: The instructions MUST be followed to help the retailer clarify if the windscreen should be replaced under manufacturers warranty (Stress crack) or Customer pay/insurance (external influence damage) |
| 2056582/4 | 2021-10-06. Service bulletin. Interior trim - Creak and rattle - Noise identification Customer statement: Noise complaint from the interior Workshop findings: The noise can be reproduced and clearly assigned to the interior Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work |