Service bulletin UBC00011
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10162811 |
| Published by NHTSA | 2019-07-15 |
| Manufacturer's number | UBC00011 |
| Manufacturer's date | 2019-06-07 |
| NHTSA component | ELECTRICAL SYSTEM; EQUIPMENT |
NHTSA's summary
The default speed limit of the 2018 UBCO 2x2 will be reducing to 45kmph/28mph. This is due to the entry of the UBCO 2x2 into the European Union - where a maximum speed limit of 45kmph/28mph applies. The new default speed limit will be implemented via firmware version x1.00.330, updated via the UBCO User App. For territories with the higher speed limit of 50kmph/30mph, it is essential that location services are enabled for the UBCO User App prior to installing firmware version x1.00.330. This will allow a speed limit of 50kmph/30mph to be applied to the 2018 UBCO 2x2 within the noted territory.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Electrical system, Equipment and accessories
| UBCO 2X2 | 2018 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| UBC00013 | 2020-03-30. Service bulletin. A number of failures of the speedometer housing & wiring connection have been reported on bikes with VIN numbers between J600001 to J600581. The failure mode has been identified as being excessive vibration from the handle bars passing through to the mounting bolts of the speedometer. This can cause the display not to function correctly. It also has been noted that in certain cases that when the bike is turned off or power removed from the clock, the time on the clock resets back to zero. This is the result of a missing capacitor on the PCB. A speedometer is supplied to resolve this. |
|---|---|
| UBC00009 | 2019-05-13. Service bulletin. This Service Bulletin provides answers to FAQ?s UBCO has received on battery charging and charge time. It serves as reference information only |
| UBC00008 | 2019-05-13. Service bulletin. This notification serves as a reminder that spoke tension on the all models of the UBCO 2x2 must be checked at PDI, 10hr service and then subsequent services. |
| UBC00007 | 2019-05-13. Service bulletin. The following Bulletin provides an update on the issue identified in the Service Bulletin UBC0005 (Formally UBC-L4X2M-09) regarding motor controllers |
| UBC-L4X2M-09 | 2018-12-03. Service bulletin. This service Bulletin provides details on the possibility for motor controllers to fail on start-up or shortly afterwards during operation. If the failure happens during start-up, the vehicle will not operate. If the failure happens during operation, the vehicle will lose power and decelerate. This communication instructs dealers to perform appropriate testing. |