Service bulletin UBC00008
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10159781 |
| Published by NHTSA | 2019-05-13 |
| Manufacturer's number | UBC00008 |
| Manufacturer's date | 2019-05-07 |
| NHTSA component | EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL |
NHTSA's summary
This notification serves as a reminder that spoke tension on the all models of the UBCO 2x2 must be checked at PDI, 10hr service and then subsequent services.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Equipment and accessories, Labels and manuals
| UBCO 2X2 | 2018 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| UBC00011 | 2019-07-15. Service bulletin. The default speed limit of the 2018 UBCO 2x2 will be reducing to 45kmph/28mph. This is due to the entry of the UBCO 2x2 into the European Union - where a maximum speed limit of 45kmph/28mph applies. The new default speed limit will be implemented via firmware version x1.00.330, updated via the UBCO User App. For territories with the higher speed limit of 50kmph/30mph, it is essential that location services are enabled for the UBCO User App prior to installing firmware version x1.00.330. This will allow a speed limit of 50kmph/30mph to be applied to the 2018 UBCO 2x2 within the noted territory. |
|---|---|
| UBC00009 | 2019-05-13. Service bulletin. This Service Bulletin provides answers to FAQ?s UBCO has received on battery charging and charge time. It serves as reference information only |
| UBC00007 | 2019-05-13. Service bulletin. The following Bulletin provides an update on the issue identified in the Service Bulletin UBC0005 (Formally UBC-L4X2M-09) regarding motor controllers |