Service bulletin IK0700079
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10162033 |
| Published by NHTSA | 2019-07-02 |
| Manufacturer's number | IK0700079 |
| Manufacturer's date | 2019-06-20 |
| NHTSA component | ENGINE AND ENGINE COOLING |
NHTSA's summary
SCR Vehicles Setting DEF Quality Faults due to Crossed DEF Tank Coolant Lines or Inverted DEFTHV
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Engine
| IC BUS 1300 FBC | 2018 to 2019 |
|---|---|
| IC BUS AC | 2014 to 2016 |
| IC BUS AE | 2014 to 2015 |
| IC BUS BE | 2014 to 2019 |
| IC BUS CASB | 2014 to 2015 |
| IC BUS CE | 2014 to 2019 |
| IC BUS CESB | 2014 to 2020 |
| IC BUS HC | 2014 to 2019 |
| IC BUS RE | 2018 |
| IC BUS RECB | 2014 to 2019 |
| IC BUS RESB | 2014 to 2017 |
| IC BUS RESB | 2019 |
| IC BUS TC | 2019 to 2020 |
| INTERNATIONAL 1300 | 2016 |
| INTERNATIONAL 3000 | 2014 |
| INTERNATIONAL 4000 SERIES 4300 | 2017 to 2018 |
| INTERNATIONAL 4300 | 2018 |
| INTERNATIONAL 4400 | 2014 |
| INTERNATIONAL 9900 | 2014 to 2019 |
| INTERNATIONAL 9900I | 2016 to 2018 |
| INTERNATIONAL ACCB | 2014 |
| INTERNATIONAL ACSB | 2014 |
| INTERNATIONAL AECB | 2014 |
| INTERNATIONAL AECB | 2016 to 2017 |
| INTERNATIONAL AESB | 2014 |
| INTERNATIONAL AESB | 2016 to 2017 |
| INTERNATIONAL BE | 2014 to 2017 |
| INTERNATIONAL BECB | 2014 to 2017 |
| INTERNATIONAL BESB | 2014 to 2017 |
| INTERNATIONAL CE | 2014 to 2017 |
| INTERNATIONAL CECB | 2014 to 2017 |
| INTERNATIONAL CESB | 2014 to 2017 |
| INTERNATIONAL CV | 2019 |
| INTERNATIONAL DURASTAR | 2014 to 2020 |
| INTERNATIONAL FBC | 2016 |
| INTERNATIONAL FBC | 2018 |
| INTERNATIONAL FE | 2016 |
| INTERNATIONAL FE | 2018 to 2019 |
| INTERNATIONAL HCCB | 2014 to 2015 |
| INTERNATIONAL HV | 2017 to 2020 |
| INTERNATIONAL HX | 2016 to 2019 |
| INTERNATIONAL LONESTAR | 2014 |
| INTERNATIONAL LONESTAR | 2015 |
| INTERNATIONAL LONESTAR | 2016 to 2019 |
| INTERNATIONAL LT | 2016 to 2020 |
| INTERNATIONAL MV | 2017 to 2020 |
| INTERNATIONAL PAYSTAR | 2014 to 2019 |
| INTERNATIONAL PROSTAR | 2014 |
| INTERNATIONAL PROSTAR | 2015 |
| INTERNATIONAL PROSTAR | 2016 to 2019 |
| INTERNATIONAL RECB | 2014 to 2015 |
| INTERNATIONAL RESB | 2014 to 2015 |
| INTERNATIONAL RH | 2016 to 2019 |
| INTERNATIONAL SFC | 2016 |
| INTERNATIONAL SFC | 2018 to 2019 |
| INTERNATIONAL TERRASTAR | 2014 to 2017 |
| INTERNATIONAL TRANSTAR | 2014 to 2019 |
| INTERNATIONAL WORKSTAR | 2014, 2015 |
| INTERNATIONAL WORKSTAR | 2016 to 2020 |
| WHEELED COACH TERRASTAR | 2014 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 20V810000 | 2020-12-23. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE |
|---|---|
| 2015546 | 2015-11-18. Engine |
| 15V329000 | 2015-05-29. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| IK2600300 | 2026-03-04. Service bulletin. This article equips technicians with the knowledge and steps needed to efficiently replace and program N9/N10 and N13 modules, while addressing potential baud rate incompatibility issues between the replacement module and the vehicle. |
|---|---|
| IK2600284 | 2026-02-05. Service bulletin. This document aims to enable technicians to: 1. Accurately identify third generation MaxxForce medium duty engine control systems. 2. Understand the programming intricacies related to these systems. 3. Autonomously execute programming tasks without needing technical support. |
| IK2600283 | 2026-02-05. Service bulletin. This document aims to enable technicians to: 1. Accurately identify N-series medium duty engine control systems. 2. Understand the programming intricacies related to these systems. 3. Autonomously execute programming tasks without needing technical support. |
| IK2600256 | 2026-02-05. Service bulletin. This article is intended to provide information for how to program International Engines that have been sold to another company and installed in a chassis that does NOT have an International VIN Number. This may include Detroit Series 40 engines, Perkins, Street Sweepers, Cranes, Fire Trucks, Generators, Blower motors, and more. |
| IK2600255 | 2026-02-05. Other. This document provides guidance for assessing the feasibility of implementing a customer-requested change to an engine or vehicle parameter/feature. Customer requested changes will be approved in accordance with the requirements specified in 40 CFR Part 1037 to ensure continued compliance with greenhouse gas (GHG) regulations. |
| IK2600090 | 2026-02-05. Other. New CARB Idle Reduction Change Request |
| IK2600047 | 2026-02-05. Service bulletin. Engine replacements for all International engines will need to follow this procedure. |
| IK08000403 | 2024-05-02. Service bulletin. This document details the procedure that must be followed to ensure proper alternator troubleshooting. |
| IK0800407 | 2024-03-06. Service bulletin. Starter Diagnostics and warranty claim procedure; all engines EXCLUDING Cummins ISB engine with Allison transmission or PSI engine. |
| IK1201476 | 2023-11-06. Service bulletin. Rebuilding Cylinder Heads on Certain MaxxForce 11/13, N13, and A26 engines; 2010 to present. |