Service bulletin 09-021-19-3587
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10160560 |
| Published by NHTSA | 2019-05-30 |
| Manufacturer's number | 09-021-19-3587 |
| Manufacturer's date | 2019-05-20 |
| NHTSA component | BACK OVER PREVENTION; ELECTRICAL SYSTEM; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA |
NHTSA's summary
On some vehicles. the center display may turn black and/or DTC U0264:00 may be stored in memory when the rear view monitoring system is on after replacing the rear mount camera. This symptom occurs due to a communication error between the new rear mount camera and a specific old CMU software version. When replacing the rear mount camera with a new one, follow the Repair Procedure below to prevent this concern from occurring. DTC U0264:00: Communication error with rear mount camera NOTE: For vehicles with a rear view monitor system with predicted vehicle path assist lines, this TSB is not applicable.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Driver assistance, Electrical system, Backup camera
Trouble codes named
U0264
| MAZDA MAZDA3 | 2019 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 15-004-20-3755 | 2021-01-05. Service bulletin. Some vehicles may exhibit that both sides (right and left sides) of the Blind Spot Monitoring (BSM) and Rear Cross Traffic Alert (RCTA) system do not work |
|---|---|
| SA-027-20f | 2020-11-04. Service bulletin. MAZDA CONNECT SYMPTOM TROUBLESHOOTING (7TH GENERATION VEHICLES). Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure. Index: No. 1 Blank Screen No. 2. Rear View Camera is not displayed No. 3 Rebooting No. 4 Infotainment System Has No Sound No. 5 Commander Switch Does Not Work No. 6 Bluetooth device will not pair No. 7 Incorrect GPS position No. 8 Voice Recognition Does Not Work No. 9 Cannot Make a Hands-Free Call No. 10 Cannot Play Bluetooth Audio No. 11 How to Check Navi SD Card VIN Lock |
| SA-027-20e | 2020-10-05. Service bulletin. MAZDA CONNECT SYMPTOM TROUBLESHOOTING (7TH GENERATION VEHICLES). Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure. Index: No. 1 Blank Screen No. 2. Rear View Camera is not displayed No. 3 Rebooting No. 4 Infotainment System Has No Sound No. 5 Commander Switch Does Not Work No. 6 Bluetooth device will not pair No. 7 Incorrect GPS position No. 8 Voice Recognition Does Not Work No. 9 Cannot Make a Hands-Free Call No. 10 Cannot Play Bluetooth Audio No. 11 How to Check Navi SD Card VIN Lock |
| SA-042-20 | 2020-04-06. Service bulletin. Some customer may experience all of the following when turning the ignition ON under hot weather conditions such as parking under the hot sun for some period of time: • i-ACTIVSENSE warning light ON (1) • Smart Brake Support (SBS) indicator light ON (2) • "Excessive Camera Temp. Drive Safely" or "Safety and Driver Support Systems Temporarily Disabled" warning messages • DTC B14F9:00 stored in memory DTC B14F9:00 cannot be found on MGSS, therefore repair cannot be performed. DTC_B14F9:00 is falsely stored instead of DTC B14F0:4B. DTC_B14F0:4B [VCM] (Forward sensing camera (FSC) internal temperature abnormality) - FSC detects temperature higher than operation range. |
| SA-010-19d | 2019-05-30. Service bulletin. The new 2019 Mazda3 has new and revised features that are different from previous models, and may be difficult to understand. This Service Alert provides valuable information to support potential dealer and customer concerns. |