Service bulletin 23-049-15
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10160030 |
| Published by NHTSA | 2019-05-20 |
| Manufacturer's number | 23-049-15 |
| Manufacturer's date | 2015-12-08 |
| NHTSA component | STRUCTURE; EQUIPMENT |
NHTSA's summary
Decklid Contacts The Body Side Aperture Above The Stop Lamp This bulletin involves adjusting the decklid and touching up paint as required. The customer may describe contact between the decklid and body side aperture (1) and/or chipped paint (2) on left or right side above the stop lamp (Fig. 1). Fig. 1 Contact Areas And Chipped Paint 1 - Decklid To Body Side Aperture Contact 2 - Chipped Paint
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Body and frame, Equipment and accessories
| DODGE CHARGER | 2016 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 2018396 | 2018-07-27. Accessories |
|---|---|
| 2017663 | 2017-12-22. Accessories |
| 17V824000 | 2017-12-21. EQUIPMENT |
| 16V043000 | 2016-01-28. STRUCTURE |
| 2016039 | 2016-01-27. Accessories |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| 3100123 | 2024-01-02. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels. |
|---|---|
| 9100263 | 2023-12-18. Service bulletin. Dynamic Sensor Prior to replacing this part, please ensure all the pre-diagnostic & diagnostic procedures have been completed with emphasis on wiring and connector integrity. If codes C006A-28, U0125-00, or C006A-46 are present, warranty analysis suggests a high likelihood of an intermittent connection at or near the wiring connector, especially if the vehicle is a pursuit variant. Please verify wiring per diagnostic procedures, as well as removal & installation guidance called out in the service manual before replacement. |
| 93120 | 2023-10-02. Service bulletin. FCA Caribbean Warranty Bulletin ID-23-20 "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC |
| 93023 | 2023-10-02. Service bulletin. Warranty Bulletin D-16-03 - "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC (Rev. B) |
| 9100196 | 2023-09-25. Service bulletin. Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used |
| 1804823 | 2023-05-30. Service bulletin. wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK |
| 3100123 | 2023-04-17. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels. |
| 31-002-22 | 2023-01-17. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Digital imaging pre authorization is required for Smart Warranty Base dealers or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels. |
| 3100122 | 2023-01-09. Service bulletin. Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components. |
| 0806920 | 2023-01-09. Service bulletin. Charger Pursuit Battery Testing and Replacement Interval Recommendation This information only bulletindiscusses using the correct test equipment and replacement interval for testing Charger Pursuit wet cell lead acid batteries. |