Service bulletin B661416
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10147558 |
| Published by NHTSA | 2018-11-13 |
| Manufacturer's number | B661416 |
| Manufacturer's date | 2016-07-01 |
| NHTSA component | EQUIPMENT; ELECTRICAL SYSTEM |
NHTSA's summary
"PARKING ASSISTANT" OPERATION IS JERKY. After programming with ISTA/P versions 3.59.0 and/or 3.59.1, vehicle operation is jerky when using the Parking Assistant. SAS (Optional Equipment System) control module software.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Electrical system, Equipment and accessories
| BMW 750LI | 2016 |
|---|---|
| BMW R NINE T | 2017 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| B611305 | 2024-02-01. Service bulletin. The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle “discharged battery” complaints. |
|---|---|
| SISIB011317 | 2022-07-05. Service bulletin. Shipping specific non-deployed vehicle safety devices to lighting resources, LLC |
| SIM010917 | 2022-07-05. Service bulletin. Shipping specific non-deployed vehicle safety devices to lighting resources, llc. This service Information bulletin provides information on shipping "specific" noin-deployed vehicle safety devices that are classified as Dangerous Goods (DG) to Lighting resources, LLC |
| B3106170621 | 2022-07-05. Service bulletin. Please return all part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC73 must appear in the text of your TEC claim. |
| MC000521 | 2021-12-13. Service bulletin. One of the following situations can occur when connecting to BN2000 motorcycles: 1. The installed control units cannot be found when reading out with ISTA. 2. Control units initially communicate after connecting to the vehicle, but communication later stops. |
| MC610821 | 2021-09-07. Service bulletin. When diagnosing fault codes (0x3A13D7, 0x3A13D9), technicians erroneously condemn the electronic throttle grip, which analyses show is rarely the culprit. |
| MC60214068 | 2021-05-17. Service bulletin. One or more of the 12 bolts on the R nine T silencer are missing, see accompanying picture. |
| B001016 | 2018-12-10. Service bulletin. ?Technical Service NEW VEHICLE DELIVERY TO CENTER: VEHICLE WILL NOT START WHILE IN TRANSPORT MODE |
| B661917 | 2018-12-10. Service bulletin. ?SERVICE ACTION: CHECK AND REPLACE LANE CHANGE WARNING SENSOR. The Lane Change Warning sensor may have been produced with faulty components. This may lead to a failure of the Lane Change Warning system (SWW). Lane Change Warning sensor hardware defect. |
| B720417 | 2018-11-26. Service bulletin. FALSE WARNINGS THAT THE FRONT PASSENGER SEAT IS OCCUPIED WITHOUT THE SEAT BELT BUCKLED. Acoustic and visual warnings indicate that the front passenger seat is occupied and the seat belt is not fastened, when the seat is actually unoccupied. If the situation is currently present, sit in the seat and move the seat to a different position then the POL (Passenger Occupancy Light) light will function correctly. In some cases the Air bag Warning Light was illuminated. Advanced Crash Safety Module (ACSM) fault "930A1C - Front passenger seat occupancy detection transmitting fault (moisture)" is stored. 1. Electronics (for example smart phones or laptops) are connected to the USB charging port or cigarette lighter and placed on the seat. 2. The seat was wet (e.g. very high humidity, spilled liquids or rain). 3. Faulty plug connection to Evaluation Electronics CIS (Capacitive Interior Sensing). 4. Excessive spacing between seat mat sensor signal wires and their grounding shield sleeve. * Drying the seat mat due to moisture. * If there is no moisture, secure loose cables and install 2 cable ties * If the 2 cables ties are already installed properly, replace the seat mat * Statement added to SI - do not replace the CIS electronics or the ACSM module for this siutation. |