WenmarOpen by Wenmar Pro

Service bulletin 08-103-14 REV. A

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10139889
Published by NHTSA2018-06-11
Manufacturer's number08-103-14 REV. A
Manufacturer's date2014-12-10
NHTSA componentEQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM); ELECTRICAL SYSTEM:SOFTWARE

NHTSA's summary

Convergence Telematics Module (CTM) Software Enhancements This bulletin involves updating the Convergence Telematics Module (CTM) software. The customer may notice the steering wheel controls and USB functionality may not operate properly after the ignition is cycled.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system, Equipment and accessories, Software

Vehicles listed
FIAT 5002015

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
08122152022-07-05. Service bulletin. This bulletin involves performing a wiTECH Misc-Function routine, for proper operation of
18-032-15 REVA2018-12-10. Service bulletin. Flash: 1.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a crank no start condition in extreme cold temperatures of -4°F (-20°C) partially due to the available fuel blend conditions, They may also experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that Diagnostic Trouble Code P0141 - O2 SENSOR 1/2 HEATER PERFORMANCE has been set in the PCM.
18-032-152018-12-10. Service bulletin. Flash: 1.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a crank no start condition in extreme cold temperatures of -4°F (-20°C) partially due to the available fuel blend conditions, They may also experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that Diagnostic Trouble Code P0141 - O2 SENSOR 1/2 HEATER PERFORMANCE has been set in the PCM.
18-032-15 REV-C2018-11-26. Service bulletin. Flash: 1.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience one of the following conditions or a a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find a Diagnostic Trouble Code has been set in the PCM. ? P0141 - O2 Sensor 1/2 Heater Performance. ? Crank no start condition in extreme cold temperatures of -4°F (-20°C) partially due to the available fuel blend conditions. Additional Software Improvements Include: ? P1046 - Cylinder 1 Oil Supply Solenoid Valve Overcurrent. ? P1048 - Cylinder 2 Oil Supply Solenoid Valve Overcurrent. ? P104A - Cylinder 3 Oil Supply Solenoid Valve Overcurrent. ? P104C - Cylinder 4 Oil Supply Solenoid Valve Overcurrent.
18-010-15 REV-C2018-11-26. Service bulletin. Flash:1.4L Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest software. The customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs): ? P0141 Oxygen Sensor 1/2 Heater Performance (software has been updated to better address this DTC, for EAB engines). ? P1046 - Cylinder 1 Oil Supply Solenoid Valve Overcurrent. ? P1048 - Cylinder 2 Oil Supply Solenoid Valve Overcurrent. ? P104A - Cylinder 3 Oil Supply Solenoid Valve Overcurrent. ? P104C - Cylinder 4 Oil Supply Solenoid Valve Overcurrent. ? P061A Internal Control Module Torque Performance (2014 Vehicles only). ? Improved reverse lamp activation time (2015 auto trans only). ? Improved cold weather starting, below -4 °F (-20 °C).
08-103-142018-06-11. Service bulletin. Convergence Telematics Module (CTM) Software Enhancements This bulletin involves updating the Convergence Telematics Module (CTM) software. The customer may notice the steering wheel controls and USB functionality may not operate properly after the ignition is cycled.
08-048-162016-07-14. Service bulletin. SUBJECT: FLASH: Electric Vehicle Control Unit (EVCU) System Enhancements OVERVIEW: This bulletin involves updating the software in the EVCU. SYMPTOM/CONDITION: A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, the technician may find the following Diagnostic Trouble Code (DTC) set in the EVCU memory: • P1A21-00 - HV Battery Contactor Control Sequence Incorrect. In addition the customer may notice one of the following conditions: • When an Electric Vehicle Supply Equipment (EVSE) is plugged in approximately 17 seconds after key off, the vehicle will not charge and will not power down. This could lead to potential 12V battery drain after prolonged period of time. • When the battery temperature is below -30°C (-22°F) and above 50°C (122°F), the thermal system does not function. • When a Level 1 EVSE is plugged in, the displayed charge time estimation for Level 2 is over estimated. The following improvements/enhancements are also included in this software release: • Improved shift strategy involving shift lever position.
08-045-162016-07-14. Service bulletin. SUBJECT: Flash: Anti Lock Brake (ABS) Module System Enhancements OVERVIEW: This bulletin involves a coordinated update of the Anti-lock Brake System (ABS) module and Regenerative Brake Controller (RBC) module software SYMPTOM/CONDITION: · U0001-00 - CAN C BUS. (Sets in ABS and RBC Module). · U1487-00 - Implausible Data Received From Regenerative Brake Controller. (Sets in ABS Module). · U1200-00 - Lost Communication with Power Inverter Module. (Sets in ABS Module).
08-045-162016-07-07. Service bulletin. SUBJECT: Flash: Anti Lock Brake (ABS) Module System Enhancements OVERVIEW: This bulletin involves a coordinated update of the Anti-lock Brake System (ABS) module and Regenerative Brake Controller (RBC) module software. SYMPTOM/CONDITION: · U0001-00 - CAN C BUS. (Sets in ABS and RBC Module). · U1487-00 - Implausible Data Received From Regenerative Brake Controller. (Sets in ABS Module). · U1200-00 - Lost Communication with Power Inverter Module. (Sets in ABS Module).
18-003-162016-06-22. Service bulletin. SUMMARY TO BE PROVIDED ON A FUTURE DATE.