Service bulletin 08-045-16

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
Type	Service bulletin
NHTSA id	10076502
Published by NHTSA	2016-07-14
Manufacturer's number	08-045-16
Manufacturer's date	2016-04-22
NHTSA component	SERVICE BRAKES, AIR:ANTILOCK:ABS WARNING LIGHT; SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:ABS WARNING LIGHT; ELECTRICAL SYSTEM:SOFTWARE

NHTSA's summary

SUBJECT: Flash: Anti Lock Brake (ABS) Module System Enhancements OVERVIEW: This bulletin involves a coordinated update of the Anti-lock Brake System (ABS) module and Regenerative Brake Controller (RBC) module software SYMPTOM/CONDITION: · U0001-00 - CAN C BUS. (Sets in ABS and RBC Module). · U1487-00 - Implausible Data Received From Regenerative Brake Controller. (Sets in ABS Module). · U1200-00 - Lost Communication with Power Inverter Module. (Sets in ABS Module).

The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

Components

Brakes, Electrical system, Anti-lock brakes, Software

Vehicles listed
FIAT 500	2013, 2014, 2015

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
0804516	2022-10-24. Service bulletin. Flash: Anti Lock Brake (ABS) Module System Enhancements
1805316	2022-07-05. Service bulletin. Diagnostic And System Improvements.
1802715 Rev C	2022-07-05. Service bulletin. Diagnostic And System Improvements.
0812215	2022-07-05. Service bulletin. This bulletin involves performing a wiTECH Misc-Function routine, for proper operation of
18-032-15 REVA	2018-12-10. Service bulletin. Flash: 1.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a crank no start condition in extreme cold temperatures of -4°F (-20°C) partially due to the available fuel blend conditions, They may also experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that Diagnostic Trouble Code P0141 - O2 SENSOR 1/2 HEATER PERFORMANCE has been set in the PCM.
18-032-15	2018-12-10. Service bulletin. Flash: 1.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a crank no start condition in extreme cold temperatures of -4°F (-20°C) partially due to the available fuel blend conditions, They may also experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that Diagnostic Trouble Code P0141 - O2 SENSOR 1/2 HEATER PERFORMANCE has been set in the PCM.
18-032-15 REV-C	2018-11-26. Service bulletin. Flash: 1.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience one of the following conditions or a a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find a Diagnostic Trouble Code has been set in the PCM. ? P0141 - O2 Sensor 1/2 Heater Performance. ? Crank no start condition in extreme cold temperatures of -4°F (-20°C) partially due to the available fuel blend conditions. Additional Software Improvements Include: ? P1046 - Cylinder 1 Oil Supply Solenoid Valve Overcurrent. ? P1048 - Cylinder 2 Oil Supply Solenoid Valve Overcurrent. ? P104A - Cylinder 3 Oil Supply Solenoid Valve Overcurrent. ? P104C - Cylinder 4 Oil Supply Solenoid Valve Overcurrent.
18-010-15 REV-C	2018-11-26. Service bulletin. Flash:1.4L Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest software. The customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs): ? P0141 Oxygen Sensor 1/2 Heater Performance (software has been updated to better address this DTC, for EAB engines). ? P1046 - Cylinder 1 Oil Supply Solenoid Valve Overcurrent. ? P1048 - Cylinder 2 Oil Supply Solenoid Valve Overcurrent. ? P104A - Cylinder 3 Oil Supply Solenoid Valve Overcurrent. ? P104C - Cylinder 4 Oil Supply Solenoid Valve Overcurrent. ? P061A Internal Control Module Torque Performance (2014 Vehicles only). ? Improved reverse lamp activation time (2015 auto trans only). ? Improved cold weather starting, below -4 °F (-20 °C).
08-103-14 REV. A	2018-06-11. Service bulletin. Convergence Telematics Module (CTM) Software Enhancements This bulletin involves updating the Convergence Telematics Module (CTM) software. The customer may notice the steering wheel controls and USB functionality may not operate properly after the ignition is cycled.
08-103-14	2018-06-11. Service bulletin. Convergence Telematics Module (CTM) Software Enhancements This bulletin involves updating the Convergence Telematics Module (CTM) software. The customer may notice the steering wheel controls and USB functionality may not operate properly after the ignition is cycled.