Service bulletin 09-002-14 REV. A
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10139771 |
| Published by NHTSA | 2018-06-11 |
| Manufacturer's number | 09-002-14 REV. A |
| Manufacturer's date | 2014-10-03 |
| NHTSA component | FUEL SYSTEM, GASOLINE; ENGINE AND ENGINE COOLING |
NHTSA's summary
MIL Illumination: P0300, P0302, P0304 or P0306 (X56 Warranty Extension) This bulletin involves checking for excessive cylinder leakage and replacing the cylinder head if necessary. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that any the following Diagnostic Trouble Codes have been set: ? P0300- Multiple Cylinder Misfire ? P0302- Cylinder 2 Misfire ? P0304- Cylinder 4 Misfire ? P0306- Cylinder 6 Misfire
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Engine, Fuel system
Trouble codes named
P0300, P0302, P0304, P0306
| CHRYSLER 200 | 2011, 2012, 2013 |
|---|---|
| CHRYSLER 300 | 2011, 2012, 2013 |
| DODGE CHALLENGER | 2011, 2012, 2013 |
| DODGE CHARGER | 2011, 2012, 2013 |
| DODGE DURANGO | 2011, 2012, 2013 |
| DODGE GRAND CARAVAN | 2011, 2012, 2013 |
| DODGE JOURNEY | 2011, 2012, 2013 |
| JEEP GRAND CHEROKEE | 2011, 2012, 2013 |
| JEEP WRANGLER | 2012, 2013 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 2019573 | 2019-11-14. Fuel System |
|---|---|
| 2016575 | 2016-11-17. Fuel System |
| 15V431000 | 2015-07-07. ENGINE AND ENGINE COOLING:ENGINE |
| 2015297 | 2015-07-02. Engine |
| 2015085 | 2015-02-26. Fuel System |
| 2013394 | 2013-11-07. Engine |
| 13V552000 | 2013-11-06. ENGINE |
| 2013042 | 2013-02-06. Fuel System |
| 13V043000 | 2013-02-06. FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY; FUEL SYSTEM, GASOLINE |
| 11V487000 | 2011-09-29. ENGINE AND ENGINE COOLING |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| U67 Combo Rev11 | 2026-07-02. Warranty extension. Emissions Recall U67 - Catalytic Converter Efficiency - Dealer Notification (Revision 11) |
|---|---|
| 112191 | 2026-05-28. Service bulletin. COOLER - ENGINE OIL |
| 112192 | 2026-05-28. Service bulletin. COOLER - ENGINE OIL |
| 105038 | 2025-05-20. Service bulletin. TUBE - FUEL INJECTOR SUPPLY & GASKET - NONE |
| 105039 | 2025-05-16. Service bulletin. TUBE - FUEL INJECTOR SUPPLY & GASKET - NONE |
| 103617 | 2025-04-01. Service bulletin. STARTER - ENGINE |
| 102812 | 2025-03-05. Service bulletin. RAIL - FUEL |
| 9100494 | 2025-01-30. Service bulletin. FUEL PUMP/LEVEL UNIT MODULE For vehicles with Saddle Fuel Tanks, need to determine if there are any DTCs in wiTECH. Follow Service Diagnostics published prior to making any changes. Review any existing SOL or TSBs published for customer complaint issue. Only the Fuel Pump Module should be replaced if there are DTCs associated with the Fuel Level Sensor number 1. Only the Auxiliary Level Sender should be replaced if there are DTCs associated with the Fuel Level Sensor number 2. If there is a mixture of DTCs between the Fuel Pump Module and the Auxiliary Level Sensor, then investigate if there is a Jumper Harness or circuit issue between the Level Sender and the PCM. Verify fuel transfer between auxiliary tank and the primary tank by monitoring the auxiliary level sensor to verify it drops after driving. |
| 9100279 | 2024-01-16. Service bulletin. COOLER Engine Oil Please be aware that the oil cooler seal is serviceable as a standalone part and should be considered for replacement as a remedy for fluid leak. |
| 9003357A | 2024-01-02. Service bulletin. ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA. |