WenmarOpen by Wenmar Pro

Service bulletin PIE0433A

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10139190
Published by NHTSA2018-06-04
Manufacturer's numberPIE0433A
Manufacturer's date2017-12-21
NHTSA componentELECTRICAL SYSTEM:SOFTWARE

NHTSA's summary

This engineering informational bulletin is requesting information from the field on vehicles that have the condition of Engineering Information ? Malfunction Indicator Lamp (MIL) On DTCs P0171 Fuel Trim System Lean Bank 1 and/or P0174 Fuel Trim System Lean Bank 2.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system, Software

Trouble codes named

P0171, P0174

Vehicles listed
BUICK ENCLAVE2014, 2015, 2016, 2017, 2018
CHEVROLET EQUINOX2014, 2015, 2016, 2017
CHEVROLET TRAVERSE2014, 2015, 2016, 2017, 2018
GMC ACADIA2014, 2015, 2016, 2017, 2018
GMC TERRAIN2014, 2015, 2016, 2017, 2018

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
14V2230002014-04-30. ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; FUEL SYSTEM, GASOLINE

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
20-NA-1322024-04-05. Service bulletin. This warranty administration bulletin provides policy information on the requirements for 12V battery testing and warranty replacements.
130089004H2023-12-11. Service bulletin. Car and Truck Fix it Right the First Time Issues
1300890032023-12-11. Service bulletin. Vehicle Software Enhancements
PIP5632G2023-01-30. Service bulletin. This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
PIP4902Q2023-01-30. Service bulletin. This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
PIP58142023-01-30. Service bulletin. This Preliminary information communicates that there some service parts released to dealers missing software.
174272021-04-30. Service bulletin. Condition Certain 2018 model year GMC Terrain vehicles equipped with a trailer package (RPO V92) may have a trailer turn signal and brake lamp that is inoperative on a connected trailer due to an incorrect calibration. Correction Dealers are to reprogram the body control module.
174172021-04-30. Service bulletin. Certain 2018 model year Chevrolet Traverse vehicles may have a condition where in the personalization menu, the user can program or disable the auto door lock (ADL) function but cannot not program the auto door unlock (ADU) setting. The required intended settings shown in the Owner’s Manual are opposite, no programming of ADL and programmable ADU. Correction Dealers are to reprogram the body control module (BCM).
17-NA-3422021-04-16. Service bulletin. Service Brake Assist Message displayed on Initial Start Up with DTC P050F Set Condition Some customers may comment that on first start up they receive a "Service Brake Assist Message" displayed. During diagnosis a technician may find DTC P050F set. Cause This may be due to a calibration within the Electronic Brake Control Module (EBCM) not giving the engine enough time to build system vacuum. Correction Reprogram the EBCM with the latest calibrations
17-NA-3302021-04-15. Service bulletin. Normal Characteristic – Push to Talk Button on Steering Wheel Control is Inoperative Condition Some customers may comment on one of the following conditions: 1. The push to talk button on the steering wheel control is inoperative when there is no phone device is paired with the vehicle. Note: The push to talk button, however, still answer OnStar hands-free calls (if equipped). 2. Cannot delete USB names from the radio display. The Radio displays the names of USB drives that were previously installed and have been removed. Cause This condition may be due to one of the following: Condition 1, no action is required. It is normal operation if you do not have a phone device paired with the vehicle via Bluetooth. Condition 2, the radio displays the last 3 sources used for the radio like AM, FM, XM, Bluetooth device streaming music or USB drive. The sources are highlighted/actively listed even after the source is removed from the system. To delete the name of the USB from the radio display, push the more button on the display and select another radio sources like AM, FM or XM. Note: The radio will show the last 3 audio sources after removed, as shown in the illustration above Correction DO NOT replace the radio assembly as this is a normal design characteristic for the infotainment system.