WenmarOpen by Wenmar Pro

Service bulletin DRW13

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10134938
Published by NHTSA2018-04-23
Manufacturer's numberDRW13
Manufacturer's date2018-03-15
NHTSA componentELECTRICAL SYSTEM:SOFTWARE

NHTSA's summary

Dealer Rework (DRW) 13 ? Mazda Connect Navigation Concern 2018MY CX-5, CX-3, CX-9, Mazda6, Mazda 3 and MX-5: We write to inform you that certain vehicles are affected by the concern mentioned below. Vehicles affected by this DRW will be visible, March 15th 2018. Parts and Warranty information and VIN lists for the DRW13 will be uploaded to MGSS on March 15, 2018. On the Mazda Connect Navigation system, when the destination is selected by entering an address, there may be a concern when entering the ?House/Business Number? as described below. a) A ?House number not found? pop-up is displayed, although the house number and selected location is correctly shown on the map. b) A ?House number not found? pop-up is displayed, but the house number displayed is different from the number inputted although the selected location is correctly shown on the map. c) The house number cannot be set up correctly. The Navigation results of house number search doesn?t match with the number inputted. Causal factor: Inappropriate software of connectivity master unit (CMU)

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system, Software

Vehicles listed
MAZDA CX-32018
MAZDA CX-52018
MAZDA CX-92018
MAZDA MAZDA32018
MAZDA MAZDA62018
MAZDA MX-52018

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
SA-001-22b2022-04-06. Service bulletin. Use the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns.
SA-001/222022-02-04. Service bulletin. Symptom troubleshooting tables to diagnose MAZDA CONNECT concerns. No. 1 Blank Screen No. 2. Rear View Camera is not displayed No. 3 Rebooting No. 4 Infotainment System Has No Sound No. 5 Commander Switch Does Not Work No. 6 Bluetooth device will not pair No. 7 Incorrect GPS position No. 8 Voice Recognition Does Not Work No. 9 Cannot Make a Hands-Free Call No. 10 Cannot Play Bluetooth Audio No. 11 Other Symptoms No. 12 How to update the Navigation SD Card Map No. 13 How to Check Navi SD Card VIN Lock
09-021-21-3818b2021-10-02. Service bulletin. All Mazda Connect vehicles in new car inventory must be updated to the software version listed below in this TSB as part of the New Car Ready Step 3 process. Make sure the new vehicle specialist receives a copy of this bulletin. Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 74.00.230 or later). NOTE: For 2016 CX-9 with version earlier than 59.00.441, the tachometer function will be removed from the Active Driving Display as part of Mazda’s continuing efforts to improve safety and reduce driver distraction. Please explain this to the customer before updating the software. If the customer agrees, turn off the tachometer display on the AD-Display tab in MAZDA CONNECT Settings before performing the update. NOTE: If the customer has customized MAZDA CONNECT with something like a different background using unauthorized software, make sure they know the following information before updating MAZDA CONNECT to avoid any issues later on. Updating MAZDA CONNECT to the latest version will erase any customization created by unauthorized software. Unauthorized customization software will not work on the latest version of MAZDA CONNECT software. The latest version of MAZDA CONNECT software cannot be rolled back to an earlier version. Mazda does not recommend unauthorized customization of MAZDA CONNECT due to the possibility of unexpected problems. Any issues related to this will not be covered under Mazda warranty policy.
SA-008-212021-02-06. Service bulletin. DTC P0942:49 is missing from the Workshop Manual on MGSS. Follow the repair procedure below to repair the vehicle until the information is added.
09-030-20-37402020-10-03. Service bulletin. All Mazda Connect vehicles in new car inventory must be updated to the software version listed below in this TSB as part of the New Car Ready Step 3 process. Make sure the new vehicle specialist receives a copy of this bulletin. Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 70.00.367 or later). NOTE: For 2016 CX-9 with version earlier than 59.00.441, the tachometer function will be removed from the Active Driving Display as part of Mazda’s continuing efforts to improve safety and reduce driver distraction. Please explain this to the customer before updating the software. If the customer agrees, turn off the tachometer display on the AD-Display tab in MAZDA CONNECT Settings before performing the update.
05-002-20-3704a2020-10-02. Service bulletin. Some customers may complain about a surging at low speeds and during acceleration. This surging is in the longitudinal direction, felt about 2 cycles per second, and occurs in the locked up 1st gear. This may be caused by the torque fluctuation and the torsional resonance in the torque converter. To correct this concern, the PCM software has been modified to reduce the torque fluctuation.
09-022-19-3599a2019-12-20. Service bulletin. All Mazda Connect vehicles in new car inventory must be updated to the software version listed below in this TSB as part of the New Car Ready Step 3 process. Make sure the new vehicle specialist receives a copy of this bulletin. Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 70.00.352 or later).
01-023-19-36482019-12-20. Service bulletin. Some vehicles may exhibit engine overheating with one or more of the following symptoms: • “EXCESSIVE ENGINE TEMPERATURE: ENGINE OUTPUT WILL BE LIMITED” displayed in the instrument cluster • Red overheating indicator illuminated • Engine temperature gauge reading in the red zone (260°F / 126°C or more) NOTE: This condition usually happens when the vehicle is in stop and go traffic. This is caused by the cooling fan not running properly due to improper control software of the Powertrain Control Module (PCM), resulting in high coolant temperature. To correct this issue, the control software of the Powertrain Control Module (PCM) has been modified
SA-047-182018-12-17. Service bulletin. Some customers may complain about a MAZDA CONNECT system reboot or blank screen. Use the flowchart below to repair the vehicle.
SA-025-182018-07-02. Service bulletin. When performing the MGSS Workshop Manual 360° View Monitor System Aiming Procedure, M-MDS may show error message "Procedure unsuccessful". This may be caused by light glare on the SST.