Service bulletin SMT-Com02-14Sept
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10125285 |
| Published by NHTSA | 2017-12-14 |
| Manufacturer's number | SMT-Com02-14Sept |
| Manufacturer's date | 2017-09-14 |
| NHTSA component | ENGINE |
NHTSA's summary
Dealer notice announcing the availability of Service Bulletin 551
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Engine
| TRIUMPH SCRAMBLER | 2018 |
|---|---|
| TRIUMPH STREET TRIPLE R ABS B1 | 2017 (the catalog's model; the bulletin names a series or trim of it) |
| TRIUMPH STREET TRIPLE S | 2018 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| SMT-COM01 | 2022-09-26. Service bulletin. Dealer notice reminding of the new California Prop 65 regulation. |
|---|---|
| SMTCOM05 | 2022-07-25. Service bulletin. Dealer notice advising of careful inspection to conduct when replacing the heat exchanger seal. |
| SMT-TN-166 | 2021-05-10. Service bulletin. Crackshaft position sensor/ignition pickup, front brake hose p-clip, headlight fixings, reed valve cover torque fixing, engine bar plugs, lower yoke wire guide, front fork oil level and volume, motorcycle assembly guide update-backrest bar, rear bevel box parts kit, and pannier frame. |
| SMT-TN-163 | 2021-05-10. Service bulletin. Mudgaurd alignment, sump, crankcase breather bolts, sump plug sealing washer, seat lock, drivebelt tension, reflector mounting o-rings, water inlet cover bolt and water outlet cover bolt, bleeding the brakes, and front inner wheel, inner tube and valve. |
| SMT-TB201-20DEC2 | 2020-01-21. Service bulletin. Technical Bulletin 200 provides instructions that apply to Steering Lock and Keys, Neutral Position Adaption, Triumph Diagnostic Tool - End of Support for Microsoft Windows 7®, Triumph Diagnostic Tool - Internet Connection and Minimum eEquipment Requirement, Torque Change, Clutch Cable, Camshaft Frame Installation, Immobiliser Antenna Wire Routing. |
| SMT-TB200-20DEC2 | 2020-01-21. Service bulletin. Technical Bulletin 200 provides instructions that apply to Camshaft Cover Tightening Sequence, Replacement Keyless ECM Setup Process, Pin Point Test - ABS Modulator Communication, Cylinder Head Oil Jet, Owners Handbook Correction - Instrument Functionality, Keyless Ignition, Torque Change, Windscreen Fixings, Front Wheel Speed Sensor Routing. |
| SMT-TB188-27Marc | 2018-05-21. Service bulletin. Technical Bulletin 188 provides instructions that apply to Triumph Diagnostic Tool Compatibility with Windows Operating Systems, Fog Lights Warning, TFT Instruments - Calibration Update, Exhaust Header Nuts Tightening Sequence, Hugger Fixing, Pinpoint Test - Brake Switches, Alternator Cover Parts Kit, Starter Motor Parts Kit. |
| SMT-TN176-03May2 | 2017-12-14. Service bulletin. Technical News 176 provides instructions that apply to Handlebar End Weight Fixings, Coolant Expansion Tank Cover Fixings, Airbox and Immobiliser Connector Anti-Tamper Foam Pad, Scheduled Maintenance Chart, Rider's Seat Fixing, Triumph Diagnoatic Tool - End of Support for Mictosoft Windows Vista, Temporary Packing Crate, Steering Lock Removal and Installation, Exhaust Clamp and Bolt Assembly, Service Manual Update - Purge Control Valce and Engine Breather Cover, Belly Pan Panel Assembly Fixings. |
| SMT-SB551-14Sept | 2017-12-14. Service bulletin. Service bulletin 551 addresses the need to change the torque figure of the fixings securing the coolant tee piece to the lower crankcase. |
| SMT-TN175-22Febr | 2017-11-03. Service bulletin. Technical News 175 provides instructions regarding updates to instrument and engine ECM calibrations. |