WenmarOpen by Wenmar Pro

Service bulletin 9003775

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10121743
Published by NHTSA2017-11-03
Manufacturer's number9003775
Manufacturer's date2017-09-06
NHTSA componentEQUIPMENT; STRUCTURE; POWER TRAIN

NHTSA's summary

Power Transfer Unit (PTU) If you have a leak at the transmission to Power Transfer Unit (PTU) interface proceed with the following repair. Do not replace the PTU for this leak. The issue is that the stub shaft on the transmission has become dislodged from the transmission creating a leak path from the transmission, not the PTU. Remove the PTU from the transmission. Inspect the stub shaft's interior differential seal to see if there seal lip damage or if it has been dislodged within the shaft prior to reinserting the shaft into the transmission. Follow Tech Connect instructions for replacing the axle seal if you find that the seal has been displaced within the stub shaft. Inspect the transmission differential seal for damage also. The risk of pulling the shaft out again still exists during assembly of the transmission and PTU. If at anytime in the assembly process you pull the PTU back off the stub shaft it may come dislodged again. FCA design changes to increase retention of the shaft are in process.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Body and frame, Equipment and accessories, Transmission and driveline

Vehicles listed
JEEP COMPASS2017

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
20176632017-12-22. Accessories
17V8240002017-12-21. EQUIPMENT
17V4330002017-07-07. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
20172512017-05-10. Powertrain
17V3010002017-05-09. POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
S2523000003 REV.A2026-04-29. Service bulletin. Door Latch, Handle And Ajar Additional Service Information.
91007762026-03-13. Service bulletin. Before replacing the RDM, please be aware that NVH from differential gears is typical and within the acceptable limits. Do not replace RDM for NVH issue.
08-075-262026-03-05. Service bulletin. Rear Taillamp Condensation Clearing Procedure On occasion, vehicle exterior taillamp assemblies get fogged with a light layer of condensation on the SYMPTOM: inside of the lenses Fig. 1. This may be reported after the lamps have been turned on and brought up to operating temperature, turned off and then rapidly cooled by cold water (such as rain, or the water from a vehicle wash). Lens fogging can also occur under certain atmospheric conditions after a vehicle has been parked outside overnight (i.e. a warm humid day followed by clear cool night). This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor. Turning the taillamps on will usually accelerate this process. This bulletin is to communicate the procedure for rear taillamp condensation clearing.
21-040-252025-10-08. Service bulletin. 948TE Transmission Reaction Shaft Service Bushing Kit Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): ● P1DB7-00 - Torque Converter Clutch Performance.
31-001-25 REV. A2025-08-21. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
31-001-25 REV. B2025-08-21. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
31-001-252025-08-21. Service bulletin. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates
1057702025-08-06. Service bulletin. PROP - LIFTGATE
08-220-252025-07-31. Service bulletin. Rear Taillamp Condensation Clearing Procedure On occasion, vehicle exterior taillamp assemblies are fogged with a light layer of condensation on the inside of the lenses Fig. 1. This may be reported after the lamps have been turned on and brought up to operating temperature, turned off and then rapidly cooled by cold water (such as rain, or the water from a vehicle wash). Lens fogging can also occur under certain atmospheric conditions after a vehicle has been parked outside overnight (i.e. a warm humid day followed by clear cool night). This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor. Turning the taillamps on will usually accelerate this process. This bulletin is to communicate the procedure for rear taillamp condensation clearing.
S25230000032025-01-16. Service bulletin. Door Latch, Handle And Ajar Additional Service Information.