Transport Canada recall 2017251
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2017251 |
| Manufacturer's number | T26 |
| Reported | 2017-05-10 |
| Component | Powertrain |
| Notification type | Safety Mfr |
| Units potentially affected | 29 |
What is wrong
On certain vehicles equipped with a 6-speed Aisin transmission, the left front halfshaft may disengage from the transmission and/or break. If this occurs, the vehicle would lose motive power and the park function, which could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect the left front halfshaft for proper engagement in the transmission and replace the left front halfshaft if it is not properly engaged.
| 2017 JEEP COMPASS |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| 9100776 | 2026-03-13. Service bulletin. Before replacing the RDM, please be aware that NVH from differential gears is typical and within the acceptable limits. Do not replace RDM for NVH issue. |
|---|---|
| 21-040-25 | 2025-10-08. Service bulletin. 948TE Transmission Reaction Shaft Service Bushing Kit Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): ● P1DB7-00 - Torque Converter Clutch Performance. |
| W84 | 2023-01-17. Service bulletin. Customer Satisfaction Notification W84 Powertrain Software Update |
| S2021000004 | 2023-01-09. Service bulletin. Valve Body Learn Procedure On WiTech Shows The Transmission Is Not In The Proper Gear After Repairs |
| 2104517 | 2022-10-31. Service bulletin. Flash: Transmission Diagnostic and Shift Enhancements This bulletin involves reprogramming the Transmission Control Module (TCM) with the latest available software. Customers may experience the following:Immediate Autostart after Autostop (without releasing the brake pedal). |
| W20 | 2022-10-24. Service bulletin. Powertrain Control Module. |
| S1908000102 | 2022-10-17. Service bulletin. (Rev. A) Power Inverter Load Ratings |
| 9003753 | 2022-10-17. Service bulletin. Powertrain Control Module Customer may experience a MIL-on condition with a P0607 - ECU INTERNAL PERFORMANCE fault in the Powertrain Control Module (PCM). This fault may occur due to a software anomaly and a combination of actions taken by the driver. DO NOT REPLACE THE PCM AT THIS TIME. Please erase the fault and return the vehicle to the customer. A resolution for this condition is under development. |
| 9003615 | 2022-10-17. Service bulletin. Electronic Shifter Module (ESM) Special Notes below from previous Techtips; NOTE 1: If mismatch between shifter NIK and PRNDM occur, it may appear that the PRNDM will not light up the first time the shifter is woken up via CAN. Please wait 2 minutes 15 seconds for the PRNDM lights to come back on. This is due to a software update feature of the Shifter lower (04670682A$). During PRNDM software update, the shifter will not be functional. NOTE 2: If Shifter is awake on CAN while disconnecting PRNDM from Shifter (04670682A$), U114C-00 will activate. This is by design and does not require replacement of PRNDM. NOTE 3: PRNDM supply Voltage from Shifter will be deactivated after 3 seconds if PRNDM is disconnected from Shifter while Shifter is awake via CAN and U114C-00 will activate. Power to Shifter will have to be removed for approx.. 20 seconds after PRNDM is connected to reset power to PRNDM from the Shifter. Power can be reset by removing battery power or disconnecting the shifter main connector. This is due to a safety feature built into the Shifter that will cut power to the PRNDM if a communication error is observed between the Shifter and PRNDM. NOTE 4: If Shifter is not responsive after Dead Battery condition, Charge Battery, and once complete disconnect battery terminals for 30 seconds and reconnect. Check Shifter functionality. Please return parts back to FCA Engineering if PRNDM is deemed non-functional after performing this TECHtip. ~ |
| 2103417 | 2022-10-17. Service bulletin. Flash: Transmission Diagnostic and Shift Enhancements AN-M4-21-20170721 |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.