Service bulletin ITB17-043
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10119218 |
| Published by NHTSA | 2017-10-15 |
| Manufacturer's number | ITB17-043 |
| Manufacturer's date | 2017-07-24 |
| NHTSA component | STRUCTURE:BODY:HATCHBACK/LIFTGATE |
NHTSA's summary
MOTION ACTIVATED LIFTGATE STICKER This bulletin applies only to vehicles equipped with deluxe technology packaage. SERVICE INFORMATION Applied vehicles equipped from the factory with a Motion Activated Liftgate should also have a Motion Activated Liftgate Sticker applied to the back door window glass. DO NOT remove this sticker during PDI, or when the vehicle is washed, or any other time the vehicle is in inventory. NOTE: - Motion activated liftgate sticker is only to be removed by the customer. - Replacement stickers can be obtained from your parts department.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Body and frame
| INFINITI QX60 | 2017 |
|---|---|
| INFINITI QX60 HYBRID | 2017 (the catalog's model; the bulletin names a series or trim of it) |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| ITB09-063C | 2026-04-29. Service bulletin. CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Infiniti by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1). |
|---|---|
| ITB13-007H | 2023-03-07. Service bulletin. REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| ITB09-039J | 2023-03-07. Service bulletin. WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| ITB12-076d | 2021-02-04. Service bulletin. POWER BACK DOOR CALIBRATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin. |
| ITB18-037 | 2018-12-03. Service bulletin. PLASTIC INTERIOR TRIM PROTECTIVE COVERING REMOVAL SERVICE INFORMATION Vehicles are delivered with plastic interior trim protective covering on the front and rear seats, front and rear door panel finishers, steering wheel, and sun visors (see examples on page 2). When removing the protective covering, care must be used to avoid scuffs, scrapes, cuts, and other abrasive contact to interior trim components. DO NOT use sharp objects like razor blades, box cutters, knives, etc. when removing the plastic interior trim protective covering. IMPORTANT: All soft trim described in this bulletin is on automatic return to NNA. Any trim found damaged in the way described in this bulletin will be charged back to the dealer. |
| ITB12-072d | 2018-10-15. Service bulletin. 2013 JX35, 2014-2019 QX60, 2014-2017 QX60 HYBRID; VIBRATION AND/OR NOISE WHEN MAKING LOW SPEED TURNS This bulletin applies only to vehicles equipped with AWD (All-Wheel Drive). This bulletin has been amended. The APPLIED VEHICLES section has been revised. No other changes have been made. Please discard previous versions of this bulletin. |
| ITB17-043a | 2018-02-21. Service bulletin. MOTION ACTIVATED LIFTGATE STICKER This bulletin has been amended to add model years to the Applied Vehicles and to update the part number in the Parts Information. Please discard the previous version of this bulletin. |
| ITB12-076b | 2017-10-25. Service bulletin. POWER BACK DOOR CALIBRATION The Applied Vehicles in this bulletin have been amended. No other charges have been made. Please discard previous versions of this bulletin. |
| ITB12-076c | 2017-08-01. Service bulletin. POWER BACK DOOR CALIBRATION This bulletin has been amended. Step 15 has been revised. No other changes have been made. Please discard previous versions of this bulletin. |