Service bulletin NTB17-060

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
Type	Service bulletin
NHTSA id	10116288
Published by NHTSA	2017-08-25
Manufacturer's number	NTB17-060
Manufacturer's date	2017-06-08
NHTSA component	ELECTRICAL SYSTEM:SOFTWARE

NHTSA's summary

2016 TITAN XD; MIL ON WITH P207F STORED This bulletin applies only to vehicles equipped with a Cummins 5.0L V8 Diesel engine. IF YOU CONFIRM The MIL is ON with P207F (Reductant Quality Performance) stored. ACTION 1. Save Computer Data with CONSULT-III plus (C-III plus). 2. At step 6 of the reprogramming procedure, confirm this bulletin applies to the vehicle you are working on. 3. If this bulletin applies, continue with reprogramming procedure. 4. Write Saved Data with CONSULT-III plus. 5. Perform DTC confirmation.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system, Software

Trouble codes named

P207F

Vehicles listed
NISSAN TITAN XD	2016 (the catalog's model; the bulletin names a series or trim of it)

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
NTB15-049r	2019-02-19. Service bulletin. TELEMATICS SERVICE INFORMATION This bulletin applies only to vehicles equipped with a Telematics Communication Unit (TCU). This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB18-031b	2018-09-17. Service bulletin. 2016-2018 NISSAN CONNECT NAVIGATION SYSTEM SOFTWARE UPDATE TO RESOLVE SEVERAL ISSUES This bulletin has been amended. The IF YOU CONFIRM section and software number has changed. No other changes have been made. Please discard previous versions of this bulletin.
NTB18-046	2018-07-23. Service bulletin. 2016-2018 TITAN XD DIESEL; AIR CONDITIONING BLOWS HOT AIR AFTER EXTENDED IDLING OVER 100°F This bulletin applies only to vehicles equipped with a Cummins 5.0L V8 Diesel engine. IF YOU CONFIRM Hot air starts to blow from the dash vents while the Air Conditioning is ON, under the following conditions: - After the engine has idled for an extended period with the vehicle in Drive (D-range). And - Ambient temperature outside the vehicle is 100°F (37.8°C) or more. ACTION 1. Save Computer Data with CONSULT-III plus (C-III plus). 2. At step 6 of the reprogramming procedure, confirm this bulletin applies to the vehicle you are working on. 3. If this bulletin applies, continue with the reprogramming procedure. 4. Write Saved Data with CONSULT-III plus.
NTB16-100c	2018-06-18. Service bulletin. 2016-2017 NISSAN CONNECT NAVIGATION SYSTEM SOFTWARE UPDATE This bulletin applies only to vehicles equipped with navigation system. This bulletin has been superseded to NTB18-031. Please discard all previous versions of this bulletin.
NTB18-031a	2018-06-18. Service bulletin. 2016-2018 NISSAN CONNECT NAVIGATION SYSTEM SOFTWARE UPDATE TO RESOLVE SEVERAL ISSUES This bulletin applies only to vehicles equipped with navigation system. This bulletin has been amended to correct Bosch contact information on page 2. No other changes have been made. Please discard previous versions of this bulletin.
PC604 2016-17	2018-01-29. Service bulletin. Transmission Control Module Reprogram *** Quality Action Summary * Nissan is conducting a dealer inventory quality action to reprogram and, if necessary calibrate, the Transmission Control Module (TCM) on specific MY2016-17 Titan XD (A61) vehicles identified in SERVICE COMM and National Service History ? Open Campaigns. These vehicles are either currently in dealer inventory or assigned and in transit to the dealer. The software update will prevent one or more of the following concerns: - Transmission shift shock when accelerating enough to create a 7 3 downshift - Engine RPM fluctuation while driving at a steady speed - Lack of power under light acceleration at low speeds (may be described as hesitation; feeling like the transmission is in too high of a gear) * What Dealers Should Do *** 1. Verify if vehicles currently in dealer inventory are affected by using Service Comm or National Service History ? Open Campaign I.D. PC604. - New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). - Refer to NPSB 15-460 for additional information - Please continue to check newly arriving inventory for campaign applicability. 2. Use the attached procedure to reprogram the TCM and, if applicable, the ECM. - If reprogramming issues arise, use CONSULT III Software version 73.10 - Use the following claims information for vehicles identified in Service Comm or DBS National Service History ? Open Campaigns ID PC604 3. Dealers are requested to remedy any affected vehicle in dealer new inventory to ensure customer satisfaction. Thank you for your prompt attention to this matter. NISSAN NORTH AMERICA, INC. Aftersales DIVISION
NTB17-062	2017-08-25. Service bulletin. 2016-2017 TITAN XD; MIL ON WITH DTC P218F WHEN OPERATED IN AMBIENT TEMPERATURE AT 32°F OR BELOW This bulletin applies only to vehicles equipped with a Cummins 5.0L V8 Diesel engine. IF YOU CONFIRM The MIL is ON with DTC P218F (REDUCTANT NO FLOW DETECTED) stored When The vehicle is operated in ambient temperatures at 32°F (0°C) or below And There are no drivability issues. ACTION 1. Save Computer Data with CONSULT-III plus (C-III plus). 2. At step 6 of the reprogramming procedure (page 7), confirm this bulletin applies to the vehicle you are working on. 3. If this bulletin applies, continue with reprogramming. 4. Write Saved Data with C-III plus.
NTB17-061	2017-08-25. Service bulletin. 2016-2017 TITAN XD; DELAY WITH RE-ACCELERATION This bulletin applies only to vehicles equipped with a Cummins 5.0L V8 Diesel engine. IF YOU CONFIRM Re-acceleration delay as follows: - Driving at a moderate steady speed, then - Reduce accelerator position to slow down, then - Increase accelerator position to bring the vehicle back to the previous speed, then - There is a delay/hesitation before the vehicle begins to accelerate. ACTION 1. Save Computer Data with CONSULT-III plus (C-III plus). 2. At step 6 of the reprogramming procedure, confirm this bulletin applies to the vehicle you are working on. 3. If this bulletin applies, continue with reprogramming procedure. 4. Write Saved Data with CONSULT-III plus.
NTB16-100b	2017-08-01. Service bulletin. 20172016-2017 NISSAN CONNECT NAVIGATION SYSTEM SOFTWARE UPDATE This bulletin applies only to vehicles equipped with navigation system. This bulletin has been amended. The APPLIED VEHICLES section has been revised. No other changes have been made. Please discard previous versions of this bulletin.
NTB16-100a	2017-08-01. Service bulletin. 20172016-2017 NISSAN CONNECT NAVIGATION SYSTEM SOFTWARE UPDATE This bulletin only applies to vehciles equipped with navigation system. This bulletin has been amended. The APPLIED VEHICLES section has been revised. No other changes have been made. Please discard previous versions of this bulletin.