Service bulletin PIC5710A
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10112922 |
| Published by NHTSA | 2017-08-15 |
| Manufacturer's number | PIC5710A |
| Manufacturer's date | 2013-03-19 |
| NHTSA component | ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:IGNITION |
NHTSA's summary
This Preliminary Information communication provides information to the technician about vehicles that have a no crank. Technician will find Diagnostic Trouble Code B1380. Technician will need to check for aftermarket part installed into the vehicle. Technician should check all the power mode voltages with the ignition switch installed. If no after-market electrical devices are found and the power modes are incorrect, replace the ignition switch.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Electrical system, Ignition
Trouble codes named
B1380
| CHEVROLET SONIC | 2012 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| PIT5119B | 2023-12-26. Service bulletin. Intermittent Remote Keyless Entry Inoperative. |
|---|---|
| PIC5753B | 2023-12-11. Service bulletin. Information On Steering Column Lock And Ignition Switch Hard To Rotate From The Lock Position. |
| PIC5753A | 2023-12-11. Service bulletin. Information On Steering Column Lock And Ignition Switch Hard To Rotate From The Lock Position. |
| PIC5753 | 2023-12-11. Service bulletin. Ignition Switch Hard To Rotate From The Lock Position |
| PIC5616A | 2023-12-11. Service bulletin. RKE Inoperative Vehicle Does Not Respond To Key Fob Button Presses. |
| 120089002A | 2023-12-04. Service bulletin. Requesting a New Key Code for Customer with Lost or Stolen Keys |
| PIC5650K | 2023-06-13. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies. |
| PIT5119E (1) | 2018-05-21. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that the keyless entry is inoperative. Technician should inspect the ignition key cylinder door sticks in the up position. If the door is found open do not replace the ignition key cylinder, use a Lubriplate type of lubrication spray and lubricate the ignition key cylinder door. Insert the tip of the key in and out to verify the door of the cylinder is not sticking. |
| PIT5119E | 2018-05-21. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that the keyless entry is inoperative. Technician should inspect the ignition key cylinder door sticks in the up position. If the door is found open do not replace the ignition key cylinder, use a Lubriplate type of lubrication spray and lubricate the ignition key cylinder door. Insert the tip of the key in and out to verify the door of the cylinder is not sticking. |
| PIT5119F | 2017-12-14. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that the keyless entry is inoperative. Technician should inspect the ignition key cylinder door sticks in the up position. If the door is found open do not replace the ignition key cylinder, use a Lubriplate type of lubrication spray and lubricate the ignition key cylinder door. Insert the tip of the key in and out to verify the door of the cylinder is not sticking. |