WenmarOpen by Wenmar Pro

Service bulletin PIC5753

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10112458
Published by NHTSA2017-08-15
Manufacturer's numberPIC5753
Manufacturer's date2012-10-09
NHTSA componentELECTRICAL SYSTEM:IGNITION; STEERING:COLUMN; ELECTRICAL SYSTEM:IGNITION:SWITCH; STEERING:COLUMN LOCKING:ANTI-THEFT DEVICE

NHTSA's summary

This Preliminary Information communication provides information to the technician that some customers may comment that when returning to the vehicle the ignition key requires high effort or may not turn from the lock position. Technician should be advised that this model is equipped with a steering column lock. If the vehicle is turned off with the steering wheel turned it may rotate back against the steering lock causing the lock to bind, resulting in the key cylinder binding.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system, Steering, Ignition, Steering column and wheel

Vehicles listed
CHEVROLET SONIC2012, 2013

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
PIT5119B2023-12-26. Service bulletin. Intermittent Remote Keyless Entry Inoperative.
PIC5753B2023-12-11. Service bulletin. Information On Steering Column Lock And Ignition Switch Hard To Rotate From The Lock Position.
PIC5753A2023-12-11. Service bulletin. Information On Steering Column Lock And Ignition Switch Hard To Rotate From The Lock Position.
PIC57532023-12-11. Service bulletin. Ignition Switch Hard To Rotate From The Lock Position
PIC5616A2023-12-11. Service bulletin. RKE Inoperative Vehicle Does Not Respond To Key Fob Button Presses.
120089002A2023-12-04. Service bulletin. Requesting a New Key Code for Customer with Lost or Stolen Keys
PIC5650K2023-06-13. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.
PI1164B2021-04-21. Service bulletin. Shifter Handle Knob Cracked and/or Will Not Operate While Shifting Out of Park Some customers may comment on the shifter handle knob being cracked and/or will not operate while shifting out of Park. This condition may occur if the chrome knob on the shifter handle cracks, not allowing the shifter to engage into gear
PIT5119E (1)2018-05-21. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that the keyless entry is inoperative. Technician should inspect the ignition key cylinder door sticks in the up position. If the door is found open do not replace the ignition key cylinder, use a Lubriplate type of lubrication spray and lubricate the ignition key cylinder door. Insert the tip of the key in and out to verify the door of the cylinder is not sticking.
PIT5119E2018-05-21. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that the keyless entry is inoperative. Technician should inspect the ignition key cylinder door sticks in the up position. If the door is found open do not replace the ignition key cylinder, use a Lubriplate type of lubrication spray and lubricate the ignition key cylinder door. Insert the tip of the key in and out to verify the door of the cylinder is not sticking.