Service bulletin 09-032-13-2849
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10110997 |
| Published by NHTSA | 2017-08-10 |
| Manufacturer's number | 09-032-13-2849 |
| Manufacturer's date | 2013-11-11 |
| NHTSA component | SEATS; EQUIPMENT |
NHTSA's summary
Some vehicles, equipped with a 4:2:4 split type rear seat, may exhibit a rattling noise when driving on rough roads. The noise is heard around the latch area of the rear center seat back, as shown below. This concern may be caused by a rubber stopper that has come off the rear center seat back bracket. The seat bracket contacts the striker and causes the noise.The shape of the rubber stopper and center seat back bracket have been changed to eliminate the noise.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Equipment and accessories, Seats
| MAZDA CX-5 | 2013, 2014 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| SA-032-23a | 2023-11-02. Service bulletin. If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices. |
|---|---|
| SA-036-23 | 2023-07-05. Service bulletin. Interior parts made of resin have antistatic coating to prevent dust from sticking on the surfaces, and depending on the conditions of use, the antistatic components may crystallize slightly, giving an appearance of white stains on the surface. To remove the stains, wipe the stained surface with a towel soaked with water mixed with a small portion of a neutral detergent. If the white stains reappear again, simply wipe them again in the same way. NOTE: The antistatic effect does not deteriorate with this procedure. |
| SA-016-23 | 2023-04-04. Service bulletin. There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method. B. Auxiliary Key Code Cut Method |
| SA-016-22a | 2023-01-05. Service bulletin. There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method B. Auxiliary Key Code Cut Method |
| SA-039-22 | 2022-07-06. Service bulletin. Some customers may complain about scratches on the instrument cluster lens. |
| Technical | 2022-06-06. Service bulletin. Mazda Technical Service Bulletins March 2016 |
| 0900816 | 2022-06-06. Service bulletin. Various Elecfdtrical System Malfunction(s) Reflated to C15 Connector Corporation |
| 0900616 | 2022-06-06. Service bulletin. Front power seats do not slide back and forth |
| 0100516 | 2022-06-06. Service bulletin. Battery test procedure requirements using the GR81291 |
| 0000216 | 2022-06-06. Service bulletin. Mazda guidelines for factory scheduled maintenance |