Service bulletin TSB-ELE106

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
Type	Service bulletin
NHTSA id	10109826
Published by NHTSA	2017-08-02
Manufacturer's number	TSB-ELE106
Manufacturer's date	2017-03-08
NHTSA component	ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; ELECTRICAL SYSTEM:SOFTWARE

NHTSA's summary

TSB: INSTRUMENT CLUSTER REPLACEMENT, SOFWARE UPGRADE AND MILEAGE SETTING - This bulletin provides the procedure to perform a software upgrade and mileage setting on 2015MY~ Sedona (YP), 2016MY~ Sorento (UMa), and 2017MY~ Forte (YD, YDm) vehicles with newly replaced instrument clusters.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system, Instrument cluster, Software

Vehicles listed
KIA FORTE	2017
KIA SEDONA	2015, 2016, 2017
KIA SORENTO	2016, 2017

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
21V725000	2021-09-17. EXTERIOR LIGHTING:TURN SIGNAL; ELECTRICAL SYSTEM:SOFTWARE
18V338000	2018-05-23. STRUCTURE:BODY:DOOR; ELECTRICAL SYSTEM:SOFTWARE

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
TSB_SST067_R1	2021-12-01. Service bulletin. This bulletin provides information regarding test procedure of the Bearing Clearance Tester (BCT) Special Service Tool (SST). The SST comes pre-calibrated from the supplier however, in some cases, due to variable shop compressor air pressure, the SST may need to be re-calibrated to ensure that the tool provides accurate readings when testing the engine rod bearing wear. The calibration and BCT measuring point maintenance is included in this bulletin.
PI1802_TSB_R8	2019-12-09. Service bulletin. TSB - Product Improvement Campaign: KNOCK SENSOR DETECTION SYSTEM - ECU LOGIC IMPROVEMENT (PI1802) - This bulletin has been revised to include additional information. This bulletin provides information related to a software update to the Engine Control Unit (ECU) to install the Knock Sensor Detection System (KSDS) in order to protect the engine from excessive connecting rod bearing damage.
PS613	2019-07-11. Service bulletin. PITSTOP: INSTRUMENT CLUSTER REPLACEMENT, MILEAGE SETTING WITH KDS - This publication provides the KDS service procedure for mileage setting on the listed vehicles with newly replaced instrument clusters.
PI1802WX_TSB_R5	2019-04-30. Service bulletin. TSB: ENGINE REPLACEMENT INSTRUCTIONS FOR DTC P1326 (PI1802W/X) - This bulletin provides information related to the Technical Service Bulletin previously published in July 2018 (PI1802, Rev 6, 01/31/2019) titled "Knock Sensor Detection System - ECU Logic Improvement". Specifically, this bulletin provides instructions on which procedures to follow if, after installation of the KSDS, any one of the subject vehicles below returns to the dealer with Diagnostic Trouble Code ("DTC"), P1326.
PI1802WX_TSB_R4	2019-04-30. Service bulletin. TSB: ENGINE REPLACEMENT INSTRUCTIONS FOR DTC P1326 (PI1802W/X) - This bulletin provides information related to the Technical Service Bulletin previously published in July 2018 (PI1802, Rev 6, 01/31/2019) titled "Knock Sensor Detection System - ECU Logic Improvement". Specifically, this bulletin provides instructions on which procedures to follow if, after installation of the KSDS, any one of the subject vehicles below returns to the dealer with Diagnostic Trouble Code ("DTC"), P1326.
VPI1802_QA	2018-08-06. Service bulletin. Q & A - This document is the Q & A for the new Product Improvement Campaign to provide information regarding a software update to the Engine Control Unit (ECU) to protect the engine from excessive connecting rod bearing damage.
VPI1802_DSM	2018-08-06. Service bulletin. DEALER SERVICE MANAGER NOTICE - This notice advised the dealer service manager of the new Product Improvement Campaign to perform a software update to the Engine Control Unit (ECU) to protect the engine from excessive connecting rod bearing damage.
VPI1802_DP	2018-08-06. Service bulletin. DEALER PRINCIPAL NOTICE - This notice advised the dealer principal of the new Product Improvement Campaign to perform a software update to the Engine Control Unit (ECU) to protect the engine from excessive connecting rod bearing damage.
TSBTRA072A_R2	2018-03-13. Service bulletin. TSB - SERVICE ACTION: INHIBITOR SWITCH - REPLACEMENT (SA317A) - This bulletin has been revised to include additional information. - This bulletin provides the procedure to replace the inhibitor switch on some 2017MY Optima (JFa), Sorento (UMa), Optima Hybrid (HEV), Optima Plug-in Hybrid (PHEV), Sportage (QL), Forte (YD), and Sedona (YP), and some 2016-2017MY Optima (JF) vehicles, equipped with a front wheel drive 6-speed transmission, which may experience the following concerns: ? Malfunction Indicator Lamp (MIL) ON with DTC P0705 - Transmission Range Sensor (TRS) Circuit Malfunction (active or history) ? CAN-related DTCs (For both Hybrids: CAN DTC C2243); ? Intermittent no crank/no start ? Erratic or harsh shifting; ? EPB and Hold lights illuminated intermittently; ? ?Key OFF? indicated after placing the selector lever into the ?P? position and depressing the Start/Stop button.Note: When this condition occurs, the ?P? position is not indicated on the instrument cluster.
PS537	2018-02-12. Service bulletin. PITSTOP - INSTANTANEOUS FUEL MILEAGE NOT PRESENT ON INSTRUMENT CLUSTER DISPLAY - This Pitstop provides information regarding the instantaneous fuel mileage not displayed in the fuel economy menu of the trip computer in Type A instrument clusters on some 2014-2018MY Forte (YD) and 2017-2018MY Forte (YDm) vehicles. In some cases, an inadvertent press of the RESET (A) button may toggle the instantaneous MPG display off in the center display.