Service bulletin 122-S7Y6Y-06
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10109265 |
| Published by NHTSA | 2017-08-01 |
| Manufacturer's number | 122-S7Y6Y-06 |
| Manufacturer's date | 2016-08-27 |
| NHTSA component | TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS; ELECTRICAL SYSTEM:SOFTWARE |
NHTSA's summary
Concerns: Tire Pressure Monitoring control unit (referred to below as "TPM control unit") Information: This is to inform you of a voluntary Workshop Campaign on the above-mentioned vehicles. High speeds (> 165mph/270 km/h) can cause an implausible warning message due to a software error in the TPM control unit. If this happens, the warning message "Tire pressure! Reduce speed" appears in the instrument cluster, although no pressure loss has occurred in the tire.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Electrical system, Tires, Software, Tire pressure monitoring
| PORSCHE PANAMERA | 2014 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| PNM942-10 | 2021-06-28. Service bulletin. Porsche Rear Seat Entertainment (PRSE III) Display Unit Replacement. The software in the new display unit is either V02.000 or V02.009. The previous software version was V01.xxx. A USB stick is enclosed with the new display unit. Use the USB stick to update V01.xxx of the other display unit to version V02.000. It is not possible to update software version V01.xxx and V02.000 Replacing display unit. |
|---|---|
| ATIALL41604 | 2021-06-28. Service bulletin. 2003 to Present All with tire pressure monitoring system. |
| No. 17-20 | 2020-10-01. Service bulletin. Service campaign information on Porsche Workshop Campaign WKK5 Workshop campaign - Re-programming air conditioning and high-voltage battery control units. |
| PIWIS2001v | 2020-07-02. Service bulletin. Information on new PIWIS tester update 39.500.020 and .025. |
| No. 41-20 | 2020-07-01. Service bulletin. Instructions on how to perform a PVTS Software update in the event that a car will not start. |
| 122-T4M9P-09 | 2019-09-23. Service bulletin. Instructions for retrofitting Sport Plus Mode on vehciles without sport chrono package already installed. |
| 122-H5U6B-06 | 2019-06-24. Service bulletin. Technical Bulletin detailing new Special Tool, Flexray Vehicle Network Tester, which is now a required tool to communicate with the vehicles modules and the Porsche in-house tester known as the PIWIS Tester III. |
| 122-P6P7K-10 | 2017-11-08. Service bulletin. There is increased friction in the air spring compressor valves at temperatures below ?13° F (?25° C). This can result in a situation in which the maximum control current is not sufficient to actuate the valves. As a result, a warning message will be displayed in the instrument cluster and Porsche Active Suspension Management (PASM) will stop working temporarily. Re-program PASM control unit using the PIWIS Tester with software version 33.010.030 (PIWIS Tester 3) or version 17.100.030 (PIWIS Tester II) or a higher software version installed. |
| 122-C8W5T-06 | 2017-09-14. Service bulletin. Concerns: Charging electronics Information: This is to inform you of a voluntary Workshop Campaign on the above-mentioned vehicles. Implausible fault entries can be stored in the fault memory on the affected vehicles even though there is no fault in the system due to a software error in the charging electronics. |
| 122-J5A5S-05 | 2017-09-14. Service bulletin. Concerns: High-voltage battery control unit Information: This is to inform you of a voluntary Workshop Campaign on the above-mentioned vehicles. New software for the high-voltage battery control unit is available for the affected vehicles. This software improves or corrects the following: The temperature of the high-voltage battery is monitored by two temperature sensors for each cell module. The current diagnostic setup of the high-voltage system does not allow for this redundancy and causes the warning message "Hybrid system failure - Park vehicle safely" to be displayed in the instrument cluster if one temperature sensor fails even though the temperature of the cell module is still monitored reliably by the remaining sensor. |