Service bulletin 01-003-13-2756
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10097281 |
| Published by NHTSA | 2017-04-13 |
| Manufacturer's number | 01-003-13-2756 |
| Manufacturer's date | 2013-01-16 |
| NHTSA component | EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL |
NHTSA's summary
SOME VEHICLES MAY EXPERIENCE A ROUGH IDLE WITH THE MIL ON AND DTC P0015 / P0524 STORED IN MEMORY.•P0015:00 - EXHAUST CMP TIMING OVER-RETARDED•P0524:00 - ENGINE OIL PRESSURE TOO LOWTHIS IS CAUSED BY A DROP IN ENGINE OIL PRESSURE DUE TO A PIECE OF FOREIGN OBJECT STUCK ON THE OIL PUMP PRESSURE RELIEF VALVE OR OCV. THE TEMPORARY ENTRY OF THE FOREIGN OBJECT TRIGGERS A MIL ILLUMINATION, BUT ROUGH IDLE WILL NOT BE PRODUCED UNTIL A LATER TIME.
The document
No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.
Components
Equipment and accessories, Labels and manuals
Trouble codes named
P0015, P0524
| MAZDA CX-5 | 2013 |
|---|---|
| MAZDA MAZDA3 | 2012, 2013 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| SA-032-23a | 2023-11-02. Service bulletin. If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices. |
|---|---|
| SA-036-23 | 2023-07-05. Service bulletin. Interior parts made of resin have antistatic coating to prevent dust from sticking on the surfaces, and depending on the conditions of use, the antistatic components may crystallize slightly, giving an appearance of white stains on the surface. To remove the stains, wipe the stained surface with a towel soaked with water mixed with a small portion of a neutral detergent. If the white stains reappear again, simply wipe them again in the same way. NOTE: The antistatic effect does not deteriorate with this procedure. |
| SA-016-23 | 2023-04-04. Service bulletin. There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method. B. Auxiliary Key Code Cut Method |
| SA-016-22a | 2023-01-05. Service bulletin. There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method B. Auxiliary Key Code Cut Method |
| SA-039-22 | 2022-07-06. Service bulletin. Some customers may complain about scratches on the instrument cluster lens. |
| Technical | 2022-06-06. Service bulletin. Mazda Technical Service Bulletins March 2016 |
| 0901216 | 2022-06-06. Service bulletin. Paint damage Mazda pocket paint guide |
| 0900816 | 2022-06-06. Service bulletin. Various Elecfdtrical System Malfunction(s) Reflated to C15 Connector Corporation |
| 0900516 | 2022-06-06. Service bulletin. Siriusxm satellite radio registration transfer after unit replacement |
| 0900416 | 2022-06-06. Service bulletin. PROPER USAGE OF DRIVER'S FLOOR MAT. |